STARTECH
STARTECH SATA24 24" SATA cable
Connects SATA drives with a 24-inch red cable supporting up to 300 MB/Sec transfer
- TypeOthers
- ColorRed
- Length24"
- Cable Length0.5 ft.
- Connector Number2
- SpecificationsConnector A: 1 - SATA Data 7 pin Female Connector B: 1 - SAT
- Fast data transfer up to 300 MB/s thanks to Serial ATA II compliance
- 24 inch length gives flexible drive placement inside the case
- Red colour makes the cable easy to identify among other wiring
- Two 7-pin female connectors provide a direct drive-to-controller link
- Brand new condition ensures reliable performance from first use
Direct SATA link
The StarTech SATA24 is a 24-inch internal cable that connects a single SATA drive to a motherboard or controller. It suits system builders and upgraders who need a reliable data path for hard disks or solid-state drives without excess slack inside the chassis.
SATA II throughput ceiling
Compliant with Serial ATA II specifications the cable supports transfer rates up to 300 MB/sec. That bandwidth handles mechanical drives and mainstream SATA SSDs comfortably; it will bottleneck faster solid-state devices that exceed the interface limit.
Two straight 7-pin connectors
Both ends carry a 7-pin female SATA data connector so the cable plugs directly into standard drive and board ports. The 24-inch length reaches across typical ATX layouts while the red jacket aids cable identification; no power conductors are included so a separate SATA power lead remains necessary.
Highlights
- Fast data transfer up to 300 MB/s thanks to Serial ATA II compliance
- 24 inch length gives flexible drive placement inside the case
- Red colour makes the cable easy to identify among other wiring
- Two 7-pin female connectors provide a direct drive-to-controller link
- Brand new condition ensures reliable performance from first use
Specifications
| Brand | StarTech.com |
|---|---|
| Model | SATA24 |
| Type | Others |
| Color | Red |
| Length | 24" |
| Cable Length | 0.5 ft. |
| Connector Number | 2 |
| Specifications | Connector A: 1 - SATA Data 7 pin Female Connector B: 1 - SATA Data 7 pin Female |
| Features | Compliant with Serial ATA II Specifications Fast data transfer rate of up to 300 MB/Sec Offers 24 inches in length for greater flexibility |
| Shipping weight | 0.02 kg |
| Package size | 151 × 122 × 23 mm |
Questions about this item
Will the 24 inch SATA cable reach a drive mounted behind my existing PCI cards?
The cable measures 24 inches end to end, giving enough slack to route around full-length cards and large CPU coolers without straining the 7-pin connectors.
How can I confirm the link is running at the rated 300 MB/Sec after I connect the drive?
Check the negotiated speed in BIOS or use a tool such as CrystalDiskInfo; a SATA II connection will report 3 Gbit/s, which matches the 300 MB/Sec specification.
Does the box include power cables or only the red 7-pin data cable?
Only the red 7-pin SATA data cable is supplied; a separate SATA power lead from your power supply is required for the drive.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



