STARTECH RTPAC10110 power extension cord 3ft 360° rotating flat plug NEMA 5-15P to 5-15R 16 AWG 125V/15A

Compact three-foot extension with rotating flat plug

The StarTech RTPAC10110 adds three feet of reach between a NEMA 5-15P wall outlet and a NEMA 5-15R device plug. Its 360° rotating flat head lets the cable lie flush against the wall, making it practical for desks, benches or rack positions where a straight moulded plug would foul furniture or adjacent sockets. The 16 AWG conductors are rated for 125 V and 15 A, matching standard North American office and lab circuits. IT professionals who need a short, tidy jumper for monitors, UPS units or test equipment will find the length and orientation useful.

Passive cord runs cool and silent

Because the assembly contains no active electronics, it generates no measurable heat and produces no audible noise during normal operation. The 16 AWG copper conductors handle the rated 15 A load with minimal voltage drop over the three-foot run, so connected gear receives full line voltage. UL certification confirms the materials and construction meet recognised safety requirements for continuous indoor use. No fan, transformer or switching circuitry is present, so power draw is limited to the attached load itself.

Steady under continuous load

The cord is designed to carry its full 15 A rating indefinitely without derating, provided the ambient temperature stays within ordinary indoor limits. The rotating joint maintains electrical continuity through its full 360° range, so cable dressing adjustments do not interrupt power. There is no thermal protection or inrush limiter inside the moulded bodies; sustained behaviour is purely a function of the 16 AWG wire and contact quality. Users who need longer runs or higher current capacity should select a heavier-gauge or higher-rated assembly.