We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten black power cords with three-prong plugs and C13 ends

STARTECH

STARTECH PXT1011010PK 10ft NEMA 5-15P to C13 Computer Power Cord 10 Pack

SKU CH-M221-B9R1K MPN PXT1011010PK

Ten 10-foot NEMA 5-15P to C13 cords rated 125V 10A with 18 AWG wire and moulded strain relief

  • Length10 feet
  • Connector DetailMale-to-Female
  • SpecificationsVoltage: 125 volts; Current: 10 amps; Weight: 5 lb; Connecto
  • Ten-foot length gives flexible placement behind desks or racks
  • 18 AWG wire rated for 125 volts and 10 amps supports standard PC and monitor loads
  • Fully moulded strain-relief connectors protect against cable fatigue
  • NEMA 5-15P to C13 fits most desktops, monitors, scanners and laser printers
  • Ten-pack bundle keeps spares on hand for IT deployments

Ten-foot replacement cords for desktop peripherals

This ten-pack of 10ft NEMA 5-15P to C13 cables replaces worn or missing power leads for PCs, monitors, scanners and laser printers. Each cord uses 18 AWG wire rated for 125 volts at 10 amps and carries UL listing. The fully moulded strain-relief connectors provide a secure fit in standard IEC C13 inlets and North American wall outlets.

Passive cables run cool and silent

With no active components, the cords generate no heat and produce zero noise during normal operation. Power draw is determined entirely by the connected device, up to the 10 amp rating of the cable assembly. The moulded construction protects the internal conductors from bending stress at the plug and connector ends.

Sustained load limited by 10 amp rating

Under continuous use the cable assembly remains within its 125 volt, 10 amp design limits as long as the attached equipment does not exceed that current. The 18 AWG conductors and moulded joints maintain consistent contact resistance over long periods. No thermal throttling or performance change occurs because the product is a passive power conductor.

Highlights

  • Ten-foot length gives flexible placement behind desks or racks
  • 18 AWG wire rated for 125 volts and 10 amps supports standard PC and monitor loads
  • Fully moulded strain-relief connectors protect against cable fatigue
  • NEMA 5-15P to C13 fits most desktops, monitors, scanners and laser printers
  • Ten-pack bundle keeps spares on hand for IT deployments

Specifications

BrandStarTech.com
ModelPXT1011010PK
Length10 feet
Connector DetailMale-to-Female
SpecificationsVoltage: 125 volts; Current: 10 amps; Weight: 5 lb; Connector: Male-to-Female; UL Listed: true
Shipping weight2.72 kg
Package size368 × 298 × 64 mm

Questions about this item

How do I connect the NEMA 5-15P plug and C13 connector correctly?

Insert the three-prong NEMA 5-15P plug into a standard 125V wall outlet or PDU, then seat the C13 end firmly into the device inlet until it clicks; the moulded strain relief prevents accidental pull-out.

Will the 18 AWG conductors or connectors need periodic replacement?

The fully moulded connectors and 18 AWG wire are rated for continuous 10 A at 125 V; under normal indoor use no scheduled replacement is required, only inspect for physical damage.

At what load does the cord hit its thermal or current limit first?

The assembly is UL Listed for 10 A at 125 V; sustained loads above 10 amps will exceed the rating before any other thermal limit appears.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.