STARTECH PXT1003 3 ft C14 to C13 computer power extension cord
- Cable Connectors
- Black
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
STARTECH
A 10 ft 14 AWG extension cord with a C14 plug and C13 receptacle rated for 125V at 15A to extend high-power connections
Struck-through versions exist but are not stocked here.
Style 14 AWG
This 10 ft cable carries a 14 AWG SJT jacket with IEC 60320 C14 plug and C13 receptacle. It adds length between a UPS or PDU and a server, workstation or high-draw peripheral. The PVC construction meets standard indoor routing needs. Rated for 125 V at 15 A, it supports equipment that exceeds typical desktop loads.
The cord requires a C14 inlet on the source side and a C13 inlet on the device side, both common on enterprise power supplies. It frees rack or floor space by letting the power source sit farther from the hardware. No additional adapters are needed when both ends match the IEC 60320 standard. The two-connector design keeps the link direct.
The 14 AWG conductors handle up to 15 A continuously, giving headroom for multi-GPU workstations or redundant server supplies. It runs out when the load exceeds 15 A or when the source voltage differs from 125 V. Buyers who need longer runs or higher amperage must select a heavier gauge or a different topology.
| Brand | StarTech.com |
|---|---|
| Model | PXT1001410 |
| Type | Cable Connectors |
| Color | Black |
| Length | 10 ft. |
| Connector Number | 2 |
| Connector Detail | Connector A: 1 - IEC 60320 C13 Power Connector B: 2 - IEC 60320 C14 Power |
| Specifications | Cable Jacket Type: PVC - Polyvinyl Chloride Cable Type: SJT Wire Gauge: 14 AWG |
| Features | One C14 plug and one C13 Receptacle rated to carry 125V at 15A Provides higher power handling, good for larger devices Extend a High-Power Power Cord Connection by up to 10ft. |
| Shipping weight | 0.47 kg |
| Package size | 320 × 110 × 107 mm |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The cord is rated for 15 A at 125 V, so the 14 AWG conductors handle that load continuously.
The SJT PVC jacket is rated for the 15 A load, so heat stays within safe limits during continuous operation.
Your equipment needs a C14 inlet, the standard mate for the C13 receptacle on this cord.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?