We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White 10 ft Cat6a shielded ethernet cable with RJ45 connectors

STARTECH

STARTECH NLWH-10F-CAT6A-PATCH 10 ft Cat6a network ethernet cable

SKU CH-3EWK-ZVPTQ MPN NLWH-10F-CAT6A-PATCH

A 10 ft white Cat6a patch cable with shielded S/FTP construction and snagless RJ45 connectors tested to 500 MHz for 10 GbE networks

  • TypeNLWH-10F-CAT6A-PATCH
  • Cat6A
  • Connector ARJ45
  • Connector BRJ45
  • Length10 ft.
  • ColorWhite
  • Supports 10GBase-T networks with tested 500 MHz bandwidth
  • Snagless molded RJ45 connectors prevent clip damage and accidental disconnects
  • Low-smoke zero-halogen jacket reduces toxic emissions in fire
  • S/FTP shielding protects signal integrity from electromagnetic interference
  • 10 ft white cable simplifies colour-coded patch-panel management

White Cat6a patch cord for 10GbE

This ten-foot white cable is built to the Cat6a specification and tested to 500 MHz, making it suitable for 10GBase-T networks. The S/FTP shielding protects signal integrity in electrically noisy environments. It is aimed at installers and IT teams who need a reliable, standards-compliant link between switches, servers or wall outlets.

LSZH jacket and snagless connectors

The low-smoke zero-halogen jacket meets strict fire-safety requirements for plenum or public-space runs. Both RJ45 ends are molded and snagless, so the retaining clips resist breakage during repeated insertion or cable management. Strain-relief boots further reduce stress on the termination point, helping maintain consistent performance over the cable’s service life.

100 W PoE++ headroom and 10 ft reach

The construction supports Power over Ethernet up to 100 W, so it can deliver full PoE++ power to access points, cameras or lighting without a separate supply. At ten feet it covers typical rack-to-patch-panel or desk-to-wall distances with slack for routing. Runs that exceed this length or require higher bandwidth than 10GBase-T will need a different cable category or active extension.

Highlights

  • Supports 10GBase-T networks with tested 500 MHz bandwidth
  • Snagless molded RJ45 connectors prevent clip damage and accidental disconnects
  • Low-smoke zero-halogen jacket reduces toxic emissions in fire
  • S/FTP shielding protects signal integrity from electromagnetic interference
  • 10 ft white cable simplifies colour-coded patch-panel management

Specifications

BrandStarTech.com
ModelNLWH-10F-CAT6A-PATCH
TypeNLWH-10F-CAT6A-PATCH
Cat6A
Connector ARJ45
Connector BRJ45
Length10 ft.
ColorWhite
ShieldedYes
Shipping weight0.23 kg
Package size203 × 152 × 51 mm

Questions about this item

Will the LSZH jacket or the S/FTP shielding need replacement after a period of use?

The LSZH jacket and S/FTP shielding are permanent parts of the cable; they do not require scheduled replacement under normal conditions.

What is the frequency limit that governs sustained 10 GbE throughput on this Cat6a cable?

The cable is tested to 500 MHz, which is the frequency ceiling that supports continuous 10GBase-T operation.

Does the 100 W PoE++ rating cause noticeable heat build-up during all-day operation?

The conductors are rated for 100 W PoE++, so the cable handles full power delivery without excessive temperature rise.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.