STARTECH
STARTECH NLWH-100F-6A-PATCH network ethernet cable 100ft 27AWG
White 100 ft Cat6a patch cable with snagless RJ45 connectors, S/FTP shielding, LSZH jacket, 27 AWG pure copper and 500 MHz bandwidth for 10 GbE and 100 W PoE++
- Wire Gauge27 AWG
- 100 ft length covers long runs without joins
- 10 GbE bandwidth supports high-speed networking
- 100 W PoE++ delivers power and data together
- 500 MHz S/FTP shielding reduces interference
- Snagless RJ45 connectors protect tabs during installs
100ft Cat6a patch cable for 10GbE and PoE++
This 100ft white Cat6a Ethernet cable supports 10GbE speeds and 100W PoE++ power delivery. It uses 27AWG pure bare copper conductors with S/FTP shielding for signal integrity. The LSZH jacket reduces smoke and toxic emissions in fire conditions. Snagless RJ45 connectors with strain reliefs protect the clip during installation and removal.
Shielded construction limits interference and heat
S/FTP shielding around each pair and the overall bundle minimises alien crosstalk and external noise. The 27AWG conductors keep resistance low over the 100ft run, supporting efficient power delivery for PoE++ devices. LSZH material does not affect thermal performance but meets strict building safety requirements. The cable is rated for 500MHz bandwidth to maintain 10G signal quality.
Snagless boots and strain reliefs ease cable
Moulded snagless boots prevent the locking tab from catching on adjacent cables or patch-panel ports. Integrated strain reliefs absorb bend stress at the connector junction, reducing the risk of conductor fatigue. The white LSZH jacket aids visual identification in dense cable runs. Lifetime warranty coverage applies to the cable assembly.
Highlights
- 100 ft length covers long runs without joins
- 10 GbE bandwidth supports high-speed networking
- 100 W PoE++ delivers power and data together
- 500 MHz S/FTP shielding reduces interference
- Snagless RJ45 connectors protect tabs during installs
Specifications
| Brand | StarTech |
|---|---|
| Wire Gauge | 27 AWG |
| Shipping weight | 1.13 kg |
| Package size | 279 × 241 × 66 mm |
Questions about this item
How do I install the snagless RJ45 connectors on this 100ft Cat6a cable without damaging the tabs?
Press each connector straight into the port until the snagless latch clicks; the boot protects the tab so it will not catch on adjacent cables during removal.
What maintenance or replacement will this S/FTP patch cord need over its lifetime?
Inspect the strain-relief boots and RJ45 contacts periodically; replace the cable if the shielding foil is kinked or the connectors no longer latch securely.
At what point does the 27 AWG conductor limit sustained 10 GbE throughput on this 100ft run?
The 27 AWG gauge meets the Cat6a 100 m channel spec, so the 100 ft length stays within the 500 MHz bandwidth rating for 10 GbE.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



