STARTECH
STARTECH NLPL-1F-CAT6A-PATCH 1ft Purple Cat6a network ethernet cable 10G 100W PoE 27AWG S/FTP 500MHz
Purple Cat6a patch cable delivers 10 Gbps at 500 MHz with snagless RJ45 connectors and 100 W PoE support
- Supports 10 Gbps data rates for high-speed networking
- Delivers up to 100 W Power over Ethernet for powered devices
- S/FTP shielding with 500 MHz bandwidth reduces interference
- Snagless RJ45 connectors prevent tab damage during installation
- LSZH jacket emits low smoke and zero halogen in fire
1ft Purple Cat6a cable for 10G links
This one-foot purple Cat6a patch cable uses snagless RJ45 connectors and S/FTP shielding. It is built for 10Gbps Ethernet and 500MHz bandwidth in short runs. The 27AWG pure bare copper conductors support 100W Power over Ethernet. LSZH jacket material meets low-smoke safety requirements.
Capacity headroom at 10Gbps and 500MHz
The cable handles 10Gbps data rates and 500MHz signalling across its one-foot length. It also carries up to 100W of PoE power for cameras, access points or phones. Longer distances or higher frequencies would exceed the rated headroom of this assembly.
Thermals noise and power in normal use
Passive copper construction produces no fan noise and adds no active heat to the rack. The 27AWG conductors carry 100W PoE with minimal voltage drop over the short run. LSZH jacket limits smoke emission if the cable is ever exposed to fire.
Highlights
- Supports 10 Gbps data rates for high-speed networking
- Delivers up to 100 W Power over Ethernet for powered devices
- S/FTP shielding with 500 MHz bandwidth reduces interference
- Snagless RJ45 connectors prevent tab damage during installation
- LSZH jacket emits low smoke and zero halogen in fire
Specifications
No published specifications for this item yet.
Questions about this item
Will the 10Gbps speed and 500MHz bandwidth work with my older Cat5e patch panel?
The cable meets Cat6a specifications for 10Gbps and 500MHz, and its RJ45 connectors are backward compatible with Cat5e panels, though the link will run at the panel's lower rating.
How can I confirm the 100W PoE capability is active after connecting the cable?
Check the powered device's status LED or management interface; if it reports receiving full power, the cable's 27AWG pure copper conductors are delivering the 100W PoE budget correctly.
Does the package include any keystone jacks or a cable tester, or are those separate purchases?
The box contains only the 1ft purple S/FTP patch cable with snagless RJ45 plugs; keystone jacks, a tester, and any mounting hardware must be bought separately.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
RARITAN COMPUTER Dominion KX II CIM DVI Dual USB kvm cable
- Black



