fenvi 10G PCIe Network Card Realtek RTL8127 Low-Profile Bracket
- 10G RI45
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
STARTECH
Shielded CAT6a patch cable supports 10 Gbps at 500 MHz with 100 W PoE++ over 3 ft
This orange Cat6a patch cord is built for 10GBASE-T networks and switches. It carries data at 10Gbps across a 500MHz bandwidth. Shielded S/FTP construction with pure bare copper conductors keeps near-end crosstalk and return loss low. The cable also delivers up to 100W PoE++ to compatible devices.
The S/FTP foil and braid shield maintains signal integrity during sustained 10Gbps throughput. Low NEXT and return loss figures stay stable when the link runs continuously at 500MHz. Pure copper 27AWG conductors resist the heating that thinner alloys exhibit under 100W PoE++ current. ETL verification confirms the performance envelope.
Gold-plated RJ45 plugs feature snagless boots that protect the locking tab during pulls through cable trays or tight panels. The 3ft length suits rack-to-panel jumps without excess slack. Shielded plugs require full seating to ground the drain wire; incomplete insertion is the most common install error. LSZH jacket meets fire-safety codes in plenum-adjacent spaces.
| Brand | StarTech.com |
|---|---|
| Model | NLOR-3F-CAT6A-PATCH |
| Type | Ethernet Cable |
| Cat | CAT6a |
| Connector A | RJ-45 (Male) |
| Connector B | RJ-45 (Male) |
| Length | 3 feet |
| Color | Orange |
| Shielded | Yes |
| Wire Gauge | 27 AWG |
| Features | Snagless design; supports 10Gbps and 500MHz; ideal for 10GBASE-T networks/switches; low NEXT and Return Loss; ETL Verified; supports up to 100W PoE++; gold-plated RJ45 connectors; pure bare copper wire with aluminum-mylar foil and tinned copper braid shielding; LSZH flame-retardant jacket; backward compatible with Cat6 and Cat5/5e |
| Shipping weight | 0.05 kg |
| Package size | 229 × 203 × 3 mm |
The pure copper conductors and S/FTP shielding keep resistance low, so the cord stays cool and adds no measurable heat or power loss during continuous 100 W PoE++ use.
Both ends need standard RJ-45 jacks that support 10GBASE-T; the gold-plated connectors on this cable mate with any compliant 10 Gbps port.
Each segment runs at its own rated speed; the 500 MHz cable will not degrade the older runs, but the overall link will be limited to the lowest category present.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?