STARTECH
STARTECH NLGN-3F-CAT6A-PATCH 3ft green CAT6a network ethernet cable
A shielded Cat6a patch cord with snagless RJ45 connectors rated for 10Gbps, 500MHz and up to 100W PoE++
- TypeEthernet Cable
- CatCAT6a
- Connector ARJ-45 (Male)
- Connector BRJ-45 (Male)
- Length3 feet
- ColorGreen
- Supports 10 Gbps for fast 10GBASE-T networks
- 500 MHz bandwidth handles high-frequency data signals
- Snagless RJ45 connectors protect tabs during frequent moves
- S/FTP shielding with pure copper reduces crosstalk
- Rated for 100 W PoE++ to power devices
Purpose and fit
This three-foot green CAT6a patch cord is built for 10GBASE-T links up to 10 Gbps at 500 MHz. The S/FTP shielding and pure bare copper conductors keep crosstalk low in dense rack or desktop runs. It suits installers who need a short, verified jumper for 100 W PoE++ gear.
What the bundle changes
Snagless boots protect the RJ45 tabs during repeated patch-panel changes. Gold-plated contacts resist oxidation in humid cabinets. The LSZH jacket meets low-smoke requirements for plenum-adjacent routes. ETL verification confirms the cable meets the stated category performance without extra tester time.
Install reality
The 27 AWG stranded wire bends easily around tight cable managers but can kink if pulled around sharp corners. Shield continuity depends on fully seating each connector; a partially inserted plug drops the link to lower speeds. The short length leaves no slack for rack movement, so plan the patch-panel port order before terminating.
Highlights
- Supports 10 Gbps for fast 10GBASE-T networks
- 500 MHz bandwidth handles high-frequency data signals
- Snagless RJ45 connectors protect tabs during frequent moves
- S/FTP shielding with pure copper reduces crosstalk
- Rated for 100 W PoE++ to power devices
Specifications
| Brand | StarTech.com |
|---|---|
| Model | NLGN-3F-CAT6A-PATCH |
| Type | Ethernet Cable |
| Cat | CAT6a |
| Connector A | RJ-45 (Male) |
| Connector B | RJ-45 (Male) |
| Length | 3 feet |
| Color | Green |
| Shielded | Yes |
| Wire Gauge | 27 AWG |
| Features | Snagless design; supports 10Gbps and 500MHz; ideal for 10GBASE-T networks/switches; low NEXT and Return Loss; ETL Verified; supports up to 100W PoE++; gold-plated RJ45 connectors; pure bare copper wire with aluminum-mylar foil and tinned copper braid shielding; LSZH flame-retardant jacket; backward compatible with Cat6 and Cat5/5e |
| Shipping weight | 0.05 kg |
| Package size | 229 × 203 × 3 mm |
Questions about this item
Will the 27 AWG pure copper conductors or the gold-plated RJ45 connectors need replacement after long-term PoE++ use?
The 27 AWG pure copper conductors and gold-plated RJ45 connectors are built for continuous 100W PoE++ loads and do not require scheduled replacement under normal operation.
What performance limit appears first when running 10GBASE-T at 500MHz over this 3-foot S/FTP cable?
The cable is ETL verified for 10Gbps at 500MHz, so the 10GBASE-T signalling ceiling is reached before any cable-induced attenuation or crosstalk limit on this length.
Does the LSZH jacket and S/FTP shielding keep heat and noise low when the cable carries 100W PoE++ all day?
The LSZH jacket and S/FTP shielding dissipate the modest heat from 100W PoE++ without audible noise, and the cable remains within its rated temperature range during continuous use.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
WAWEIS
WAWEIS power adapter for AmazonBasics SB210 2.1 Channel Bluetooth Sound Bar
$15.99
0.00018453BTC
In stock
