STARTECH
STARTECH NLBL6FCAT6APATCH 6ft CAT6a Snagless S/FTP network ethernet cable Blue
Shielded Cat6a cable tested to 500 MHz for 10 Gigabit Ethernet with snagless RJ45 connectors
- TypeEthernet
- Cat6A
- Connector ARJ45
- ColorBlue
- Features, , , ,
- Shielded S/FTP construction blocks EMI/RFI for reliable 10 Gbps throughput
- Tested to 500 MHz bandwidth supports 10GBase-T network performance
- Snagless molded RJ45 connectors protect clips from damage during installation
- Blue color enables quick visual identification in dense cable runs
- 6 ft length suits short-distance rack or desk connections
6 ft shielded Cat6a cable
This 6 ft StarTech Cat6a patch cable uses S/FTP shielding to protect 10 Gigabit Ethernet signals from electromagnetic interference and noise. Snagless molded RJ45 connectors prevent clip damage and accidental disconnection. The blue jacket aids quick visual identification in dense cable runs. It suits installers who need reliable shielded links at standard patch lengths.
Tested to 500 MHz for sustained 10G throughput
Each cable is tested up to 500 MHz bandwidth, confirming performance well above the Cat6a requirement for 10GBase-T networks. Shielding maintains signal integrity over the full length during continuous high-speed transfers. The construction resists degradation that unshielded cables can suffer in electrically noisy environments. It is not for runs that exceed the tested frequency margin or require longer unsupported spans.
Low-profile connectors reduce strain
Molded strain relief keeps the RJ45 body cool by avoiding sharp bends at the termination point. Snagless boots protect the locking tab from bending, preserving a firm connection that does not loosen from vibration. The S/FTP foil and braid contain emissions without adding bulk that would trap heat in tight bundles. It is not for installations needing plenum-rated jackets or outdoor UV resistance.
Highlights
- Shielded S/FTP construction blocks EMI/RFI for reliable 10 Gbps throughput
- Tested to 500 MHz bandwidth supports 10GBase-T network performance
- Snagless molded RJ45 connectors protect clips from damage during installation
- Blue color enables quick visual identification in dense cable runs
- 6 ft length suits short-distance rack or desk connections
Specifications
| Brand | StarTech |
|---|---|
| Model | NLBL-6F-CAT6A-PATCH |
| Type | Ethernet |
| Cat | 6A |
| Connector A | RJ45 |
| Color | Blue |
| Features | , , , , |
| Shipping weight | 0.45 kg |
| Package size | 163 × 155 × 8 mm |
Questions about this item
Does the shielded Cat6a construction keep the cable cool and quiet during continuous 10 Gigabit traffic?
The S/FTP shielding blocks EMI and RFI so the signal stays clean at 500 MHz without extra heat or noise from interference.
What devices must already have RJ45 ports for this 6 ft blue patch lead to work?
Any switch, router, server or PC with standard RJ45 jacks will accept the connectors on both ends.
Will the snagless RJ45 plugs mate reliably with older Cat5e or Cat6 wall jacks I already have?
Yes, the RJ45 interface is backward-compatible so the cable plugs into existing Cat5e or Cat6 outlets without issues.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box C6PC28-BK-05 Slim-Net Cat6 Patch Cable 5 ft
Axiom WG8583-AX SFP+ Transceiver 10GBASE-SR 850nm 984ft Firebox M440
- Consumer Electronics



