We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue 100ft Cat6a patch cable with snagless RJ45 connectors

STARTECH

STARTECH NLBL-100F-6A-PATCH network ethernet cable 100ft blue cat6a 27awg 500mhz

SKU CH-94SC-59KCC MPN NLBL-100F-6A-PATCH

A 100 ft blue Cat6a patch cord with shielded S/FTP construction, snagless RJ45 connectors and LSZH jacket rated for 10 GbE and 100 W PoE++

  • Wire Gauge27 AWG
  • Supports 10 GbE speeds with 500 MHz bandwidth
  • Delivers up to 100 W PoE++ for powered devices
  • S/FTP shielding and LSZH jacket reduce interference and fire risk
  • Snagless RJ45 connectors protect tabs during frequent moves
  • 27 AWG pure bare copper conductors ensure reliable signal over 100 ft

100ft CAT6a Shielded Patch Cable

This 100ft blue CAT6a patch cable uses 27 AWG pure bare copper conductors with S/FTP shielding and a LSZH jacket. It terminates in snagless RJ45 connectors fitted with strain reliefs. The construction supports 10GbE transmission and carries up to 100W PoE++. It is rated for 500MHz bandwidth.

Suited for 10GbE runs and high-power PoE

The shielded design and 500MHz rating make this cable appropriate for 10 Gigabit Ethernet links and Power over Ethernet installations requiring up to 100W. Buyers needing a shorter patch lead or an unshielded UTP cable for simpler desktop connections should consider a different specification.

Verify connector spacing and pathway rating

Confirm the 100ft length reaches between your switch and device without excess tension on the RJ45 plugs. Ensure the LSZH jacket meets the fire-safety requirements for the intended installation pathway. Check that the S/FTP shielding can be correctly grounded at the patch panel or switch end.

Highlights

  • Supports 10 GbE speeds with 500 MHz bandwidth
  • Delivers up to 100 W PoE++ for powered devices
  • S/FTP shielding and LSZH jacket reduce interference and fire risk
  • Snagless RJ45 connectors protect tabs during frequent moves
  • 27 AWG pure bare copper conductors ensure reliable signal over 100 ft

Specifications

BrandStarTech
Wire Gauge27 AWG
Shipping weight1.13 kg
Package size246 × 216 × 64 mm

Questions about this item

What RJ45 devices do I need at each end to use this 100ft Cat6a cable?

Connect the snagless RJ45 plugs to any two RJ45 ports — a router, switch, PC, NAS or PoE++ device — and the link will negotiate up to 10GbE at 500MHz.

Will this 27AWG shielded cable work with my older Cat5e patch panel and gigabit switch?

Yes. The S/FTP construction and RJ45 connectors are fully backward compatible, so the cable will run at gigabit speeds on legacy Cat5e hardware while still supporting PoE++.

How can I verify the 500MHz bandwidth and 10GbE throughput after installation?

Run a cable certifier or a 10GbE iperf test between the two connected devices; a clean pass at 500MHz and sustained 10Gbps confirms the cable is performing to spec.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.