STARTECH
STARTECH NLBK14FCAT6APATCH 14ft CAT6a network ethernet cable
A 14 ft shielded Cat6a patch cord with LSZH jacket, snagless RJ-45 connectors and 100 W PoE++ support for 10 GbE links
- Supports 10 GbE speeds with 100W PoE++ power delivery
- Low-smoke zero-halogen jacket reduces toxic fumes during fire emergencies
- S/FTP shielding blocks electromagnetic interference for reliable data transfer
- Snagless RJ-45 connectors protect latch tabs during installation and routing
- 14 ft length suits standard rack-to-device patch connections
STARTECH 14ft CAT6a LSZH Cable
This 14 ft CAT6a Ethernet cable uses Low-Smoke Zero-Halogen (LSZH) jacketing and S/FTP shielding for Multi-Gigabit speeds up to 10 Gbps. It supports 100W PoE++ per IEEE 802.3bt-2018 and features snagless RJ-45 connectors with integrated strain relief for durable connections.
Ideal for PoE++ and EMI-sensitive runs
Suits installers needing LSZH fire safety ratings and shielded performance for 10GbE or 100W PoE devices in plenum or riser spaces. Buyers who only need unshielded patch cords for short desktop links or who require a different cable length should look at other options.
Simple RJ-45 plug-in installation
Snagless boots protect connector tabs during routing through cable managers or tight pathways. Molded strain reliefs prevent sharp bends at termination points. The main risk is exceeding the 100 m channel limit for 10GbE when combining this patch cord with long horizontal runs.
Highlights
- Supports 10 GbE speeds with 100W PoE++ power delivery
- Low-smoke zero-halogen jacket reduces toxic fumes during fire emergencies
- S/FTP shielding blocks electromagnetic interference for reliable data transfer
- Snagless RJ-45 connectors protect latch tabs during installation and routing
- 14 ft length suits standard rack-to-device patch connections
Specifications
No published specifications for this item yet.
Questions about this item
What devices must already have RJ-45 ports to use this 14 ft cable?
Any network equipment with standard RJ-45 jacks — switches, routers, servers, PCs, or PoE++ endpoints — will accept the snagless connectors on this Cat6a patch cord.
Will the S/FTP shielding and LSZH jacket interfere with older Cat5e or Cat6 runs in the same tray?
The foil-and-braid shield contains emissions, so the cable sits safely beside legacy unshielded runs without degrading their 1 Gbps or 2.5 Gbps signals.
How can I confirm the link is running at 10 Gbps after plugging it in?
Check the port LEDs or switch dashboard for a 10 G indicator; the cable’s Cat6a rating and 100 W PoE++ support guarantee the physical layer meets 10 GbE requirements.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



