We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 50ft CAT6a ethernet cable with snagless RJ45 connectors

STARTECH

STARTECH NLBK-50F-CAT6A-PATCH 50ft network ethernet cable 27AWG 500MHz 10GbE 100W PoE++

SKU CH-G819-117VW MPN NLBK-50F-CAT6A-PATCH

A 50ft shielded Cat6a patch cord with snagless RJ45 connectors, 27AWG pure copper wire, 500MHz bandwidth, 10GbE speed and 100W PoE++ support

  • Wire Gauge27 AWG
  • Supports 10GbE speeds with 500MHz bandwidth
  • Delivers up to 100W PoE++ for powered devices
  • 27AWG pure bare copper ensures reliable signal integrity
  • S/FTP shielding with LSZH jacket reduces interference and fire risk
  • Snagless RJ45 connectors with strain relief protect the 50ft cable

50ft CAT6a shielded patch cable

This 50ft CAT6a cable uses S/FTP shielding and 27 AWG pure bare copper conductors to deliver 500 MHz bandwidth and 10 GbE performance. Snagless RJ45 connectors on both ends simplify rack and desk routing. The LSZH jacket meets low-smoke requirements for plenum-adjacent installations.

10 GbE headroom with 100 W PoE++

The 500 MHz rating supports full 10 GbE throughput across the 50 ft run while the 27 AWG copper carries up to 100 W PoE++ for access points, cameras or phones. Fluke testing and ETL verification confirm the cable meets CAT6a limits at this length. Longer runs or higher frequencies would exceed the guaranteed headroom.

Snagless RJ45 ends for dense patches

Dual RJ45 connectors with strain reliefs plug directly into switches, patch panels or wall plates without special tools. The LSZH jacket reduces smoke in confined pathways and the snagless boots protect tabs during frequent moves. Builds needing keystone termination or outdoor-rated sheathing will require a different cable type.

Highlights

  • Supports 10GbE speeds with 500MHz bandwidth
  • Delivers up to 100W PoE++ for powered devices
  • 27AWG pure bare copper ensures reliable signal integrity
  • S/FTP shielding with LSZH jacket reduces interference and fire risk
  • Snagless RJ45 connectors with strain relief protect the 50ft cable

Specifications

BrandStarTech
Wire Gauge27 AWG
Shipping weight0.57 kg
Package size229 × 229 × 41 mm

Questions about this item

Will the 27AWG conductors and 10GbE rating work reliably with my older Cat5e patch panel and gigabit switch?

The cable is built to the Cat6a 500MHz specification and uses pure bare copper, so it will negotiate at the highest speed both ends support — up to 10GbE on the cable side and gigabit on your existing switch.

How can I confirm the link is running at 10GbE and delivering 100W PoE++ after I plug it in?

Check the port LEDs or management interface on each device; they will show a 10GbE link rate and PoE++ class when the connection is active.

Does the 50ft length include both snagless RJ45 ends, and do I need any extra couplers or grounding kits?

The 50ft measurement covers the complete assembly with both RJ45 connectors installed; no additional couplers or grounding accessories are required.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.