We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red Cat6 patch cable 7 ft snagless molded connectors PVC jacket

STARTECH

STARTECH N6PATCH7RD 7 ft Cat6 network ethernet cable Red

SKU CH-5XR8-ZYS77 MPN N6PATCH7RD

A 7 ft red Cat6 patch cable rated for 10 Gbps up to 160 ft with 250 MHz bandwidth, 24 AWG stranded copper, snagless connectors and 100 W PoE support

  • TypeNetwork Cable
  • Cat6
  • Length7 ft.
  • ColorRed
  • FeaturesConstructed with top quality components Constructed and test
  • Supports 10 Gbps speeds up to 160 ft distance
  • 250 MHz bandwidth handles 1/2.5/5 Gbps multi-gigabit networks
  • 24 AWG 100% copper conductors ensure reliable signal quality
  • Snagless molded connectors prevent tab damage during installation
  • 100 W PoE capability powers devices through the cable

Ready for Multi-Gigabit networks

This seven-foot Cat6 patch cable supports 1 2.5 and 5 Gbps links and 10 Gbps runs up to 160 feet. Red PVC jacket and snagless molded connectors simplify rack and desk routing. 24 AWG stranded copper conductors are UL listed under file E132276-A.

PoE power and crosstalk control

The cord delivers up to 100 W of Power over Ethernet for access points cameras and VoIP phones. Construction is tested to minimise Near End Crosstalk and the molded strain relief protects the connector junction from bending stress.

Not for permanent outdoor or plenum installs

PVC jacket is not UV rated and does not meet plenum fire codes so the cable is unsuitable for exterior runs or air-handling spaces. Buyers needing shielded pairs or longer 10 Gbps distances should select a higher category cable.

Highlights

  • Supports 10 Gbps speeds up to 160 ft distance
  • 250 MHz bandwidth handles 1/2.5/5 Gbps multi-gigabit networks
  • 24 AWG 100% copper conductors ensure reliable signal quality
  • Snagless molded connectors prevent tab damage during installation
  • 100 W PoE capability powers devices through the cable

Specifications

BrandStarTech.com
ModelN6PATCH7RD
TypeNetwork Cable
Cat6
Length7 ft.
ColorRed
FeaturesConstructed with top quality components
Constructed and tested, to ensure minimal Near End Crosstalk (NEXT)
Molded snag-less connectors
Molded strain relief prevents near connector damage
Cable Jacket Type: PVC - Polyvinyl Chloride
Wire Gauge: 24 AWG
Fire Rating: CMG Rated (General Purpose)
Cable Rating: CAT6a - 10Gbit/s
Wiring Standard: TIA/EIA-568-B.1-2001 T568B
Connector A: 1 - RJ45 Male
Connector B: 1 - RJ45 Male
Shipping weight0.11 kg
Package size222 × 191 × 13 mm

Questions about this item

What length of cable run does this 7 ft patch cord support for 10 Gbps speeds?

The Cat6 cable is rated for 10 Gbps up to 160 ft, so this 7 ft length is well within that limit.

What is the correct way to route the cable to use the molded strain relief?

The molded strain relief is built into each connector; avoid sharp bends right at the plug so the relief absorbs tension.

How often should I check the 24 AWG copper conductors for PoE heating?

The 100 W PoE rating and UL‑listed 24 AWG copper are designed for continuous operation; no periodic conductor checks are required.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.