STARTECH
STARTECH N6PATCH6GR 6 ft Cat6 network ethernet cable
A 6 ft Cat6 UTP patch cable with gold-plated RJ-45 connectors, snagless boots and CMG-rated PVC jacket
- TypeConsumer Electronics
- Cat6
- Connector A1 x RJ-45 Male
- Connector B1 x RJ-45 Male
- Length6 ft.
- ColorGray
- Supports 10 Gbps speeds up to 160 ft distance
- 250 MHz bandwidth handles 2.5/5 Gbps multi-gigabit networks
- 24 AWG stranded copper conductors ensure reliable signal integrity
- Gold-plated RJ-45 contacts resist corrosion for lasting performance
- Snagless boot design protects release tabs during installation and removal
6 ft Cat6 Patch Cable
This six-foot Cat6 patch cable uses 24 AWG stranded copper conductors with gold-plated RJ-45 connectors on both ends. It is rated for 500 MHz bandwidth and carries a CMG fire rating for general-purpose indoor runs. The snagless boot protects the latch during frequent insertions and removals. Gray PVC jacket resists abrasion in typical office or home environments.
Upgrade From Cat5e Links
The cable replaces older Cat5e patch cords when the link must support multi-gigabit speeds up to 10 Gbps at distances up to 160 ft. It also satisfies 100 W Power over Ethernet requirements that thinner or lower-category cables cannot meet. The jump is worth it when existing wiring limits throughput or PoE budget on 2.5 Gbps or 5 Gbps switches.
Sustained Load Behaviour
Under continuous 10 Gbps traffic the 500 MHz rated bandwidth and 24 AWG copper keep insertion loss within Cat6 limits across the full 160 ft channel. The CMG-rated jacket maintains performance at typical indoor temperatures without degradation. Snagless boots prevent intermittent disconnects caused by latch damage during cable management adjustments.
Highlights
- Supports 10 Gbps speeds up to 160 ft distance
- 250 MHz bandwidth handles 2.5/5 Gbps multi-gigabit networks
- 24 AWG stranded copper conductors ensure reliable signal integrity
- Gold-plated RJ-45 contacts resist corrosion for lasting performance
- Snagless boot design protects release tabs during installation and removal
Specifications
| Brand | StarTech.com |
|---|---|
| Model | N6PATCH6GR |
| Type | Consumer Electronics |
| Cat | 6 |
| Connector A | 1 x RJ-45 Male |
| Connector B | 1 x RJ-45 Male |
| Length | 6 ft. |
| Color | Gray |
| Shielded | No |
| Features | Cable Jacket Type: PVC - Polyvinyl Chloride Cable Type: Snagless Connector Plating: Gold Fire Rating: CMG Rated (General Purpose) Wiring Standard: TIA/EIA-568-B.1-2001 T568B Cable Ratin:g CAT6 - 500 MHz Conductor Type: Stranded Copper Wire Gauge: 24 AWG |
| Shipping weight | 0.10 kg |
| Package size | 201 × 177 × 22 mm |
Questions about this item
What RJ-45 connector spacing does the snagless boot on this 6 ft Cat6 cable require for a secure fit?
The snagless boot fits standard RJ-45 ports wired to TIA/EIA-568-B.1-2001 T568B with gold-plated contacts.
Which wiring standard must the installer follow when terminating this cable to avoid crossed pairs?
Terminate both ends to the T568B pinout defined in TIA/EIA-568-B.1-2001; reversing one end creates a crossover link.
How often should the PVC jacket on this CMG-rated patch cord be inspected for wear in a 100 W PoE deployment?
Inspect the PVC jacket annually for cracks or kinks, especially near the snagless boots, to maintain 100 W PoE safety.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Nlp Comprehensive CAT6-14WHT network ethernet cable 14 ft white Cat6 550 MHz 24 AWG gold RJ-45
- Category 6
- Category 6
Honeywell CT45-CIGR-1 computer power adapter cord
- Electronic Accessor…



