We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Purple Cat6 patch cable, 3 ft, snagless RJ45 connectors, molded PVC jacket

STARTECH

STARTECH N6PATCH3PL 3 ft Cat6 network ethernet cable

SKU CH-TDM3-7B0C1 MPN N6PATCH3PL

A 3 ft Cat6 patch cable with snagless RJ-45 connectors for Gigabit and 10 Gbps networks up to 160 ft

  • TypeNetwork Cable
  • Cat6
  • Connector A1 x RJ-45 Male Network
  • Connector B1 x RJ-45 Male Network
  • Length3 ft.
  • ColorPurple
  • 3 ft length keeps desk runs tidy
  • Snagless moulded boots protect the latch during frequent moves
  • Category 6 rating supports 10 Gbps up to 160 ft at 250 MHz
  • 24 AWG stranded 100 % copper conductors carry 100 W PoE
  • ETL verified and UL listed to ANSI/TIA-568-B.1-2001 CMG standard

Cat6 patch cable for Gigabit and Multi-Gig links

This three-foot Category 6 patch cord connects two RJ-45 ports with solid copper conductors inside a purple PVC jacket. It is built for desktop, rack or wall-plate runs where a short, reliable link is needed. The cable carries Power over Ethernet up to 100 W and meets ETL, UL and ANSI/TIA-568-B requirements for commercial installations.

Snagless boots and molded strain relief

Molded connectors feature snagless boots that protect the locking tabs during repeated insertion and removal. The UTP construction uses 24 AWG stranded copper for flexibility in tight cable-management channels. CMG rating allows in-wall routing where local code permits, and the T568B wiring scheme ensures straight-through compatibility with standard network gear.

250 MHz bandwidth supports 10 Gbps up to 160 ft

At this three-foot length the cable comfortably handles 1, 2.5, 5 and 10 Gbps Ethernet without signal degradation. The 250 MHz verified bandwidth leaves headroom for Multi-Gigabit equipment, but runs beyond 160 ft would require a higher-category cable to maintain 10 Gbps performance. Buyers needing longer 10 Gbps segments or shielded pairs for noisy environments should select a different cable type.

Highlights

  • 3 ft length keeps desk runs tidy
  • Snagless moulded boots protect the latch during frequent moves
  • Category 6 rating supports 10 Gbps up to 160 ft at 250 MHz
  • 24 AWG stranded 100 % copper conductors carry 100 W PoE
  • ETL verified and UL listed to ANSI/TIA-568-B.1-2001 CMG standard

Specifications

BrandStarTech.com
ModelN6PATCH3PL
TypeNetwork Cable
Cat6
Connector A1 x RJ-45 Male Network
Connector B1 x RJ-45 Male Network
Length3 ft.
ColorPurple
FeaturesCable Type: Category 6
Cable Characteristic: Patch Cable
Features:
Molded
Snagless
Conductor: Copper
Jacket: PVC
Certifications & Standards:
ETL Verified
UL Listed
ANSI/TIA-568-B
CMG Rated
TIA/EIA-568-B.1-2001 T568B
Green Compliance: Yes
Green Compliance Certificate/Authority: RoHS
Shipping weight0.06 kg
Package size218 × 199 × 15 mm

Questions about this item

What speeds does the Cat 6 standard on this cable support in practice?

This cable delivers Multi Gigabit 1/2.5/5Gbps and 10Gbps up to 160ft at 250MHz.

What physical space do the connectors need to fit?

Each end has an RJ-45 male plug with a snagless molded boot that protects the latch during insertion and removal.

How is the cable wired and what wiring mistake should be avoided?

It follows the T568B pinout per ANSI/TIA-568-B.1-2001; do not mix T568A and T568B ends on the same run.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.