We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White 1 ft Cat6 patch cable with RJ-45 connectors

STARTECH

STARTECH N6PATCH1WH 1 ft Cat6 network ethernet cable

SKU CH-JPN8-SQYPE MPN N6PATCH1WH

White Cat6 patch cable with snagless RJ45 connectors and gold-plated contacts, rated for 10 Gbps up to 160 ft and 100 W PoE

  • TypeConsumer Electronics
  • Cat6
  • Connector A1 x RJ-45 Male
  • Connector B1 x RJ-45 Male
  • Length1 ft.
  • ColorWhite
  • Delivers up to 10 Gbps over 160 ft
  • 24 AWG stranded copper conductors ensure signal integrity
  • Gold-plated RJ-45 connectors resist corrosion for reliable contact
  • Snagless boot design protects release tabs during installation
  • CMG fire rating and UL listing meet commercial safety standards

1 ft Cat6 patch cord

The StarTech N6PATCH1WH is a one-foot Cat6 UTP patch cable with RJ-45 male connectors on both ends. It is built with 24 AWG stranded 100 percent copper conductors and a white PVC jacket. The cable carries a CMG fire rating and meets the TIA/EIA-568-B.1-2001 T568B wiring standard. It suits anyone needing a short, reliable link for Gigabit or multi-gigabit Ethernet with PoE support.

Upgrading from older category cables

This cable replaces Cat5 or Cat5e patch cords when higher bandwidth or Power over Ethernet capability is required. The jump is worthwhile when the network equipment supports 2.5Gbps, 5Gbps or 10Gbps speeds up to the rated distance, or when 100W PoE devices must be powered over the link. It is not for installations that need shielded construction or runs longer than the specified 160-foot limit for 10Gbps operation.

Capacity and headroom

Rated at 250 MHz and tested to 500 MHz, the cable comfortably handles 1Gbps, 2.5Gbps and 5Gbps connections at full channel lengths and 10Gbps up to 160 feet. Gold-plated contacts and snagless boots protect the connectors during repeated mating cycles. Headroom runs out beyond the 160-foot 10Gbps threshold or in environments that demand shielded cabling for electromagnetic immunity.

Highlights

  • Delivers up to 10 Gbps over 160 ft
  • 24 AWG stranded copper conductors ensure signal integrity
  • Gold-plated RJ-45 connectors resist corrosion for reliable contact
  • Snagless boot design protects release tabs during installation
  • CMG fire rating and UL listing meet commercial safety standards

Specifications

BrandStarTech.com
ModelN6PATCH1WH
TypeConsumer Electronics
Cat6
Connector A1 x RJ-45 Male
Connector B1 x RJ-45 Male
Length1 ft.
ColorWhite
ShieldedNo
FeaturesCable Jacket Type: PVC - Polyvinyl Chloride
Cable Type: Snagless
Connector Plating: Gold
Fire Rating: CMG Rated (General Purpose)
Wiring Standard: TIA/EIA-568-B.1-2001 T568B
Cable Ratin:g CAT6 - 500 MHz
Conductor Type: Stranded Copper
Wire Gauge: 24 AWG
Shipping weight0.03 kg
Package size220 × 200 × 10 mm

Questions about this item

Does the 1 ft white Cat6 cable fit a standard RJ-45 keystone jack?

Yes, both ends use standard RJ-45 male connectors that fit any RJ-45 keystone or port.

What is the common mistake when plugging the snagless boot into a dense switch?

Pushing the latch tab down too hard can bend it; press the release tab gently until you hear the click.

When should the cable be replaced if it carries 100 W PoE?

Replace it if the jacket shows cracks, the boots tear, or connectors become loose after repeated unplugging.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.