We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray Cat6 Ethernet cable 150 ft snagless RJ45 connectors

STARTECH

STARTECH N6PATCH150GR network ethernet cable Cat6 150 ft Gray snagless

SKU CH-DHDC-WM93R MPN N6PATCH150GR

A 150 ft Cat6 patch cable with snagless RJ45 connectors, gold-plated contacts, 24 AWG stranded copper conductors, and CMG fire rating for general-purpose Gigabit Ethernet and PoE installations

  • Cat6
  • Connector A1 x RJ-45 Male
  • Connector B1 x RJ-45 Male
  • Length150 ft.
  • ColorGray
  • ShieldedNo
  • 150 ft length reaches distant network points without extra couplers
  • Cat6 500 MHz rating supports 10 Gbps speeds up to 160 ft
  • Snagless RJ45 boots protect locking tabs during frequent moves
  • Gold-plated contacts resist corrosion for reliable long-term conductivity
  • CMG fire rating allows safe in-wall and riser installation

Ready-to-run patch cable

This 150 ft Cat6 patch cable arrives terminated with gold-plated RJ-45 connectors on both ends. The snagless boots protect the locking tabs during routing through cabinets or across floors. CMG fire rating and UL listing E132276-A confirm compliance for general-purpose indoor installation.

Build integration

Stranded 24 AWG copper conductors keep the cord flexible for tight bends behind racks or under carpet. Unshielded twisted-pair construction reduces bulk while supporting Power over Ethernet loads up to 100 W. No shield drain wire means one less termination step for installers.

Capacity and headroom

Rated to 500 MHz, the link carries 1, 2.5, 5 and 10 Gbps Ethernet up to the full 150 ft length with margin to the 160 ft 10 Gbps limit. PoE++ devices such as wireless access points or PTZ cameras draw full power without voltage-drop concerns. Buyers needing shielded runs for high-EMI environments or lengths beyond 160 ft at 10 Gbps should specify a different cable type.

Highlights

  • 150 ft length reaches distant network points without extra couplers
  • Cat6 500 MHz rating supports 10 Gbps speeds up to 160 ft
  • Snagless RJ45 boots protect locking tabs during frequent moves
  • Gold-plated contacts resist corrosion for reliable long-term conductivity
  • CMG fire rating allows safe in-wall and riser installation

Specifications

BrandStarTech.com
ModelN6PATCH150GR
Cat6
Connector A1 x RJ-45 Male
Connector B1 x RJ-45 Male
Length150 ft.
ColorGray
ShieldedNo
FeaturesCable Jacket Type: PVC - Polyvinyl Chloride
Cable Type: Snagless
Connector Plating: Gold
Fire Rating: CMG Rated (General Purpose)
Wiring Standard: TIA/EIA-568-B.1-2001 T568B
Cable Ratin:g CAT6 - 500 MHz
Conductor Type: Stranded Copper
Wire Gauge: 24 AWG
Shipping weight1.91 kg
Package size420 × 342 × 88 mm

Questions about this item

What is the maximum data rate this Cat6 cable can sustain at its full 150 ft length?

The cable supports 10 Gbps up to 160 ft, so at 150 ft it delivers the full 10 Gbps rated speed.

Does the PVC jacket or unshielded design cause noticeable heat buildup during continuous 100W PoE operation?

The 24 AWG 100% copper conductors handle 100W PoE without overheating; the CMG-rated PVC jacket is rated for general-purpose in-wall use.

Which devices or ports must I already have to use this cable at its rated 10 Gbps speed?

Both endpoints need RJ45 ports that support 10GBASE-T or Multi-Gig 2.5/5/10 Gbps negotiation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.