We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short black Cat6 patch cable with slim snagless RJ45 plugs

STARTECH

STARTECH N6PAT6INBKS network ethernet cable Cat6 6 in black slim snagless 28 AWG

SKU CH-TMNP-NP7W0 MPN N6PAT6INBKS

A slim Cat6 patch cord 36% thinner than standard cable for high-density racks, with snagless RJ45 connectors and 28 AWG copper conductors

  • TypeNetwork Ethernet Cable
  • Cat6
  • Connector A1 x RJ-45 Male
  • Connector B1 x RJ-45 Male
  • Length6 in.
  • ColorBlack
  • Slim profile fits dense racks with 36% thinner design
  • Snagless RJ45 clips protect connectors during frequent patch changes
  • 28 AWG stranded copper improves airflow in crowded cabinets
  • Cat6 UTP rating meets ANSI/TIA-568-C.2 for gigabit speeds
  • 6-inch length suits short runs in panels and closets

run Cat6 patch cord

This 6-inch Cat6 UTP cable uses 28 AWG conductors and a 36% slimmer jacket than standard patch cords, terminating in snagless RJ-45 plugs with 50-micron gold contacts. It meets the ANSI/TIA-568-C.2 patch-cord specification and is built for dense rack and panel environments where space and airflow are limited.

High-density rack installs only

The ultra-short length and slim profile suit patching between adjacent ports on the same switch, server or panel in a crowded cabinet. It will not reach between separate racks, across a room or to a wall outlet; installers who need longer runs or shielded construction should select a different cable.

6-inch length

At 6 inches (approximately 15 cm) this cord only bridges immediately adjacent RJ-45 ports. Verify that the distance between your two connection points fits within this span before ordering.

Highlights

  • Slim profile fits dense racks with 36% thinner design
  • Snagless RJ45 clips protect connectors during frequent patch changes
  • 28 AWG stranded copper improves airflow in crowded cabinets
  • Cat6 UTP rating meets ANSI/TIA-568-C.2 for gigabit speeds
  • 6-inch length suits short runs in panels and closets

Specifications

BrandStarTech.com
ModelN6PAT6INBKS
TypeNetwork Ethernet Cable
Cat6
Connector A1 x RJ-45 Male
Connector B1 x RJ-45 Male
Length6 in.
ColorBlack
ShieldedUTP
Features36% thinner cable for flexible cable installations in crowded network closets and cable-management panels
Meets the ANSI/TIA-568-C.2 standard for patch cord performance
Allows better airflow and optimizes heat dissipation
RJ45 connector-clip protectors eliminate cable snags and breaks during installation
Black PVC jacket for color coding your connections
6 in. in length
50-micron gold-plated connectors for a clear signal
High-quality 28 AWG copper wire
Shipping weight0.02 kg
Package size224 × 198 × 13 mm

Questions about this item

What equipment needs an RJ-45 port to connect this 6 in cable?

Any device with a standard RJ-45 jack — router, switch, patch panel, server or desktop NIC — will accept the male connectors on both ends.

Will the 28 AWG slim profile fit alongside standard Cat6 cables in my existing patch panel?

Yes. The cable is 36% thinner than a regular Cat6, so it routes easily through crowded panels and improves airflow around older, thicker cords.

How can I confirm the link is running at Cat6 performance after plugging it in?

Check the connection status on your switch or NIC; it should show 1 Gbps full duplex, which is the rated speed for the ANSI/TIA-568-C.2 compliant cable.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.