We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pink slim Cat6 Ethernet cable with snagless RJ45 connectors, 5ft length

STARTECH

STARTECH N6PAT5PKS 5ft Pink Slim CAT6 Network Ethernet Cable

SKU CH-EZ71-WW2ZB MPN N6PAT5PKS

A slim Cat6 patch cable that is 36% thinner for tight routing, supports 10 Gbps at 250 MHz and 100W PoE++, with snagless RJ-45 connectors and LSZH jacket

  • Slim 36% thinner diameter eases routing in dense racks
  • Snagless 50-micron gold contacts reduce signal loss on every connection
  • 28AWG pure bare copper wire delivers reliable 10 Gbps throughput
  • LSZH jacket emits low toxic fumes for safer enclosed installs
  • Supports 100W PoE++ for power-hungry IP cameras and devices

Slim Cat6 cable for dense installs

This five-foot pink patch cord uses a slim Cat6 design that is 36% narrower than standard Cat6 cabling, giving extra flexibility and better airflow in crowded racks or panels. It is built with 28AWG pure bare copper conductors and snagless RJ45 connectors fitted with 50-micron gold-plated contacts for reliable signal transmission. The Low-Smoke Zero Halogen jacket meets safety needs in enclosed or poorly ventilated spaces.

Ideal for high-density closets and PoE devices

Suits network managers who need to route many cables through tight cable-management panels while keeping pathways clear for troubleshooting. It also supports Power over Ethernet up to 100W under IEEE 802.3bt Type 4, so it can feed IP cameras, boardroom displays or other PoE++ endpoints without a separate power run. Buyers who need longer runs, outdoor-rated jackets or shielded twisted-pair construction should look at something else.

Check connector clearance and PoE budget

Verify that the equipment ports accept standard RJ45 plugs and that the snagless boots fit the available space around each jack. Confirm the switch or injector can deliver the required PoE++ power budget for every connected device, since the cable is rated for 100W maximum. Ensure the 250MHz bandwidth and 10Gbps capability match the performance tier of the surrounding network infrastructure.

Highlights

  • Slim 36% thinner diameter eases routing in dense racks
  • Snagless 50-micron gold contacts reduce signal loss on every connection
  • 28AWG pure bare copper wire delivers reliable 10 Gbps throughput
  • LSZH jacket emits low toxic fumes for safer enclosed installs
  • Supports 100W PoE++ for power-hungry IP cameras and devices

Specifications

No published specifications for this item yet.

Questions about this item

What type of RJ45 port does my switch or device need for this cable's connector to fit?

The cable uses standard RJ45 connectors with 50-micron gold-plated contacts, so any standard RJ45 port will accept it.

Will this slim cable handle the same 10 Gbps speed as my existing standard Cat6 runs?

Yes, it is compliant with ANSI/TIA-568-C.2 for guaranteed Cat6 performance up to 10 Gbps at 250MHz.

How can I verify the cable is delivering PoE++ power correctly after I plug it in?

Check that the connected PoE device powers on and operates normally; the cable supports IEEE 802.3bt Type 4 for up to 100W delivery.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.