STARTECH MDP2DVIMM3B mini displayport cable 3 ft 1920x1200
- MiniDisplayPort to…
- 3 ft.
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
STARTECH
Connects a DVI display to a Mini DisplayPort source at up to 1920x1200 or 1080p over a 10 ft passive cable
This 10 ft cable connects a DVI-D monitor to a Mini DisplayPort source using a passive NXP 3361 chipset. It carries a digital signal only and supports resolutions up to 1920x1200 and 1080p. Male connectors on both ends provide a direct link without extra adapters. Suitable for desktops or laptops with a DP++ port.
The built-in passive circuitry converts the DisplayPort++ output to a DVI-D signal without external power. This simplifies cabling for wide-screen monitors and projectors that accept a dual-link DVI digital input. Thunderbolt ports that output DisplayPort signals work with this cable. No driver installation is required on supported operating systems.
Verify the video source provides a DisplayPort++ (DP++) signal; standard DisplayPort-only ports will not drive this passive adapter. Ensure the display accepts a DVI-D digital connection rather than DVI-A or DVI-I analog pins. The 10 ft length suits typical desk setups but may not reach distant ceiling-mounted projectors.
| Brand | StarTech.com |
|---|---|
| Model | MDP2DVIMM10B |
| Type | Mini DisplayPort to DVI |
| Cable Length | 10 ft. |
| Connector Number | 2 |
| Connector Detail | Connector A: 1 - Mini-DisplayPort (20 pin) Male Connector B: 1 - DVI-D (25 pin) Male |
| Terminal Gender | Male to Male |
| Specifications | Chipset ID: NXP 3361 Converter Type: Passive Output Signal: DVI-D (DVI Digital) Wide Screen Supported: Yes Maximum Digital Resolutions: 1920x1200 / 1080p System and Cable Requirements: DP++ (DisplayPort++) port required from video card or video source for DVI and HDMI signal pass-through |
| Features | 1x Male Mini DisplayPort connector, 1x Male DVI connector Supports resolutions up to 1920x1200 (WUXGA) and HDTV resolutions up to 1080p Compatible with Intel Thunderbolt devices that are capable of outputting a DisplayPort signal |
| Shipping weight | 0.16 kg |
| Package size | 197 × 133 × 23 mm |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The passive converter uses a fixed NXP 3361 chipset with no moving parts or firmware, so no scheduled replacement is required.
The cable is rated for a maximum digital resolution of 1920x1200, and that ceiling is reached before any thermal or bandwidth bottleneck occurs.
As a passive Mini DisplayPort to DVI-D converter, it draws only the small amount of power supplied by the source port and produces negligible heat during all-day use.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?