STARTECH
STARTECH LSATA8 8 in Latching SATA Cable
An 8-inch latching SATA III cable with two 7-pin receptacles supports up to 6 Gbps data transfer in tight server or workstation builds
- TypeCable Connectors
- ColorRed
- Length8"
- Cable Length8 in.
- Connector Number2
- Connector DetailConnector A: 1 - 7 pin SATA Data Receptacle Connector B: 1 -
Struck-through versions exist but are not stocked here.
- 8-inch length fits tight mini-tower builds
- Latching connectors prevent accidental disconnection in servers
- SATA 6 Gbit/s throughput supports fast data transfer
- 26 AWG PVC jacket protects signal integrity
- Red colour aids quick cable identification
Purpose-built for tight builds
The StarTech LSATA8 is an 8-inch SATA III data cable with latching connectors on both ends. It targets system integrators and enthusiasts assembling mini-tower PCs, high-end workstations or server storage subsystems where cable routing space is at a premium.
Latching connectors prevent accidental disconnects
The 7-pin receptacles click into place, maintaining signal integrity under vibration or when drives are swapped in dense arrays. A red PVC jacket and 26 AWG conductors make the short run easy to identify and route alongside power cables without adding bulk.
SATA III interface caps throughput at 6 Gbps
The cable complies with Serial ATA II specifications, so connected drives negotiate at the link speed the host controller supports. It cannot accelerate a SATA II or SATA I device beyond its native rate, and it does not carry power — a separate SATA power lead is still required for every drive.
Highlights
- 8-inch length fits tight mini-tower builds
- Latching connectors prevent accidental disconnection in servers
- SATA 6 Gbit/s throughput supports fast data transfer
- 26 AWG PVC jacket protects signal integrity
- Red colour aids quick cable identification
Specifications
| Brand | StarTech.com |
|---|---|
| Model | LSATA8 |
| Type | Cable Connectors |
| Color | Red |
| Length | 8" |
| Cable Length | 8 in. |
| Connector Number | 2 |
| Connector Detail | Connector A: 1 - 7 pin SATA Data Receptacle Connector B: 1 - 7 pin SATA Data Receptacle |
| Specifications | Type and Rate: SATA 6 Gbit/s (SATA III) Cable Jacket Type: PVC - Polyvinyl Chloride Wire Gauge: 26 AWG Connector Style: Latching |
| Features | Fast data transfer rate of up to 6 Gbps Compliant with Serial ATA II Specifications Applications: Mini tower computers High-end workstations For use in servers and storage subsystems Compatible with Serial ATA Hard Drives, CD-RW, DVDs, and other devices SATA Drive Arrays |
| Shipping weight | 0.01 kg |
| Package size | 124 × 119 × 17 mm |
Other versions of this model
3 more in the same range
Same family, different memory, cooler or clock — compare before you commit.
STARTECH LSATA18 18in latching SATA cable M/M red
- Cable Connectors
- Red
STARTECH LSATA24 2 ft SATA cable red male to male
- Cable Connectors
- Red
Questions about this item
Will the 26 AWG PVC jacket degrade or need replacement inside a server chassis?
The PVC jacket and 26 AWG conductors are rated for standard internal use; no scheduled replacement is required unless physical damage occurs.
Does the 6 Gbit/s SATA III rating hold steady during continuous RAID array rebuilds?
The cable meets SATA 6 Gbit/s specification; sustained throughput is limited by the connected drives and controller, not the cable itself.
Does the red 8-inch latching cable add noticeable heat or power draw in an all-day workload?
The passive cable draws no power and generates no measurable heat; the latching connectors simply secure the link without affecting thermals.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.






