STARTECH
STARTECH JD096CST 1.2m 10G SFP+ Direct Attach Cable
A 1.2 m passive twinax cable with latched SFP+ connectors for 10 Gbps direct-attached links
- TypeNetwork Cable
- SpecificationsType: 10GBase direct attach cable - SFF-8431/SFF-8432 Techno
- 10 Gbps passive Twinax link for short-reach 10GBase connections
- 2 m length with latched SFP+ ends for secure rack installs
- MSA, RoHS and FCC compliant for multi-vendor switch interoperability
- Hot-swappable 30 AWG copper cable rated at 100 Ohm impedance
- Tested compatible with HPE 5500, 5800 and Cisco SFP+ ports
What this cable does
The StarTech JD096CST is a 1.2 metre passive twinaxial direct attach cable with SFP+ latched connectors on both ends. It provides a 10 Gbps link between compatible switches, routers or network cards without using separate transceivers. The cable meets SFF-8431 and SFF-8432 specifications and is built with 30 AWG conductors and a PVC jacket.
Check your ports before ordering
Verify that both devices accept SFP+ modules and support passive copper direct attach cables at 10 Gbps. Some switches require coded or active cables and will not establish a link with a passive MSA-compliant assembly. Confirm the port density and latch clearance in your chassis so the connectors seat fully.
How it fits in a rack build
The 1.2 metre length suits adjacent or same-rack connections between top-of-rack switches and servers. Passive operation draws no extra power and adds no latency beyond the copper medium. MSA compliance lets the cable work in multi-vendor environments including HPE, Cisco, Ubiquiti and other listed platforms. Hot-swappable design allows changes without downtime.
Highlights
- 10 Gbps passive Twinax link for short-reach 10GBase connections
- 2 m length with latched SFP+ ends for secure rack installs
- MSA, RoHS and FCC compliant for multi-vendor switch interoperability
- Hot-swappable 30 AWG copper cable rated at 100 Ohm impedance
- Tested compatible with HPE 5500, 5800 and Cisco SFP+ ports
Specifications
| Brand | StarTech.com |
|---|---|
| Part Number | JD096CST |
| Type | Network Cable |
| Specifications | Type: 10GBase direct attach cable - SFF-8431/SFF-8432 Technology: Twinaxial Features: Passive cable Length: 4 ft Connector: SFP+ - latched Connector (Second End): SFP+ - latched Color: Black OEM Manufacturer Equivalent Part Number: HP JD096C Manufacturer Warranty: 2-year warranty General Network Cable Type: 10GBase direct attach cable - SFF-8431/SFF-8432 Technology: Twinaxial Jacket Material: PVC American Wire Gauge (AWG): 30 Impedance: 100 Ohm Features: Passive cable Length: 4 ft Weight: 2.65 oz Color: Black Connectivity Connector: SFP+ - latched Connector (Second End): SFP+ - latch |
| Shipping weight | 0.08 kg |
| Package size | 203 × 102 × 51 mm |
Questions about this item
Does the StarTech JD096CST ship with any transceivers or mounting hardware, or is it just the passive twinax cable?
The box contains only the 1.2 m passive twinax cable with latched SFP+ connectors on both ends; no transceivers, screws or mounting brackets are included.
Should I choose the 30 AWG 1.2 m version or look for a longer or thicker-gauge alternative?
The JD096CST is a single 30 AWG, 1.2 m (3.9 ft) passive assembly rated for 10 Gbps; if your rack spacing or power budget requires a different length or active cable, you would need a different part number.
What does the 10 Gbps rating mean when the cable is plugged into an HPE 5500 or Cisco switch?
The cable complies with SFF-8431/SFF-8432 and MSA, so it will negotiate a 10 Gbps link on any MSA-compliant SFP+ port — including HPE 5500, 5800, A5500, A5800 and Cisco switches — without configuration.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
HPE
HPE R1C72A AP-MNT-MP10-E Campus AP 10-Pack Wall-box Mount Bracket Kit
$227.99
0.00265642BTC
In stock
HP
HP JG545A Power Supply 1110 W for 5500-24G/48G PoE+ Switches
- Power Supply
- Designed For: HP 55…
$628.99
0.00732866BTC
In stock