We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular SFP+ transceiver module with LC duplex port and metal housing

TP-Link

TP-Link SM5110-SR 10GBASE-SR SFP+ transceiver

SKU CH-FWE2-2689N MPN SM5110-SR

A 10GBASE-SR SFP+ transceiver for multi-mode fibre links up to 300 metres at 10 Gbps

  • Device TypeTransceiver
  • 10 Gbps full-duplex throughput over multi-mode fibre
  • 850 nm wavelength suits standard short-range optics
  • Reaches 300 m on 50/125 µm fibre or 33 m on 62.5/125 µm fibre
  • Hot-pluggable LC/UPC interface enables live insertion
  • SFP+ MSA and DDM support ensures broad switch compatibility

TP-Link 10GBASE-SR SFP+ Transceiver

The TP-Link SM5110-SR is an 850 nm multi-mode SFP+ transceiver that adds a 10 Gbps Ethernet link over LC/UPC fibre. It targets network administrators upgrading enterprise switches or data-centre gear to 10 Gbps speeds.

Sustained 10 Gbps multi-mode operation

The module maintains full-duplex 10 Gbps throughput across the declared distances of 300 m on 50/125 µm fibre and 33 m on 62.5/125 µm fibre. Digital Diagnostic Monitoring reports real-time optical parameters so link health stays visible under continuous load. Hot-pluggable insertion avoids downtime during capacity changes.

Compatibility checks before ordering

Verify that your switch provides standard SFP+ slots and supports the SFP+ MSA specification used by this transceiver. Confirm the installed fibre plant uses multi-mode cable with either 50/125 µm or 62.5/125 µm cores to match the supported reach. Ensure LC/UPC patch cords are available for the connection.

Highlights

  • 10 Gbps full-duplex throughput over multi-mode fibre
  • 850 nm wavelength suits standard short-range optics
  • Reaches 300 m on 50/125 µm fibre or 33 m on 62.5/125 µm fibre
  • Hot-pluggable LC/UPC interface enables live insertion
  • SFP+ MSA and DDM support ensures broad switch compatibility

Specifications

Device TypeTransceiver
Shipping weight0.07 kg
Package size124 × 79 × 39 mm

Questions about this item

Does the TL-SM5110-SR generate noticeable heat or noise when running continuously in a 10G SFP+ slot?

The module is a passive optical transceiver with no moving parts, so it adds minimal heat and produces no audible noise during continuous operation.

What cabling and switch port does the SM5110-SR require to establish a 10G link?

You need a switch with an SFP+ slot and a multi-mode LC/UPC patch cord — 50/125 µm fibre for up to 300 m or 62.5/125 µm fibre for up to 33 m.

Will this transceiver work in an older switch that only has 1 Gbps SFP ports?

No, the SM5110-SR is a 10GBASE-SR module and requires a 10G SFP+ port; it will not operate in a 1 Gbps SFP slot.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.