We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 12 inch PWM fan splitter cable with one female and two male 4-pin connectors

STARTECH

STARTECH FAN4SPLIT12 12" 4-pin PWM fan splitter cable .5 ft 26 AWG

SKU CH-EY4V-1G2GS MPN FAN4SPLIT12

Connects two 4-pin PWM fans to one power-supply header using a 12-inch 26 AWG cable

  • TypeCable Connectors
  • ColorBlack
  • Length12"
  • Cable Length0.5 ft.
  • SpecificationsWire Gauge: 26 AWG
  • Connector A1x TX4 female

Color Splitter

  • Extension
  • Splitter

Struck-through versions exist but are not stocked here.

  • Splits one PWM header for two fans using a 12" 26 AWG cable
  • Powers two 4-pin fans from a single PSU connector with TX4 ends
  • Keeps cabling tidy at .5 ft length inside compact cases
  • Black connectors match standard motherboard and fan colour schemes
  • Female-to-male layout connects directly without adapters

Splitter cable for dual PWM fans

This twelve-inch cable connects two four-pin PWM fans to a single power-supply header. The female TX4 plug attaches to the supply while two male TX4 connectors feed the fans. It is built with twenty-six AWG wire in a black sheath.

Practical limit of one header

A single motherboard or power-supply header can only report one fan speed and send one PWM duty cycle to both fans. The two fans will therefore spin at the same rate and the system will see only one RPM signal. Builders needing independent speed control or monitoring for each fan cannot use this splitter.

Three-connector TX4 layout

The assembly provides exactly one female and two male TX4 connectors, giving three connection points in total. This fixed layout determines whether the cable matches the header and fan plugs in a given build.

Highlights

  • Splits one PWM header for two fans using a 12" 26 AWG cable
  • Powers two 4-pin fans from a single PSU connector with TX4 ends
  • Keeps cabling tidy at .5 ft length inside compact cases
  • Black connectors match standard motherboard and fan colour schemes
  • Female-to-male layout connects directly without adapters

Specifications

BrandStarTech.com
ModelFAN4SPLIT12
TypeCable Connectors
ColorBlack
Length12"
Cable Length0.5 ft.
SpecificationsWire Gauge: 26 AWG
Connector A1x TX4 female
Connector B2x TX4 male
Connector Number3
Terminal GenderFemale to Male
FeaturesConnect two 4-pin (PWM) Fans to a Single Connector on the Power Supply
Shipping weight0.02 kg
Package size133 × 122 × 14 mm

Questions about this item

Should I pick the 12-inch or the .5-foot length for my build?

They are the same cable — 12 inches equals .5 foot — so either measurement describes the identical reach.

What does the 26 AWG wire gauge mean once the cable is installed?

26 AWG indicates a thin, flexible conductor that easily routes between tight chassis gaps while still carrying the low current that PWM fans draw.

How does the 4-pin TX4 interface cap fan control in practice?

The TX4 connectors pass the PWM signal through to both fans, letting the motherboard or controller vary speed on both units from a single header.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.