We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 6.6 ft DisplayPort cable with latching male connectors on both ends

STARTECH

STARTECH DISPL2M 6.6 ft DisplayPort cable male to male latching

SKU CH-KDV5-WXACS MPN DISPL2M

A 6.6 ft DisplayPort 1.2 cable with latching male connectors supporting 4k x 2k resolution at 21.6 Gbps bandwidth

  • TypeDisplayPort Cable
  • ColorBlack
  • Length6.60 ft.
  • Cable Length6.6 ft.
  • Connector Number2
  • Connector DetailConnector A: 1 x DisplayPort (20 pin) Latching Male Connecto
  • Secure 4K connection up to 21.6 Gbps with HBR2 bandwidth
  • Latching male connectors prevent accidental disconnection during use
  • 6 ft length fits typical desktop-to-monitor setups
  • Shielded 28 AWG conductors reduce signal interference
  • CMG fire rating meets general-purpose installation requirements

6.6 ft DisplayPort cable with latches

This 6.6 ft DisplayPort 1.2 cable connects two devices using male 20-pin latching connectors. It supports 4k x 2k resolution at HBR2 bandwidth up to 21.6 Gbps and is backward compatible with DisplayPort 1.1. The cable suits workstations and displays that need a secure link over a moderate run.

PVC jacket with foil-and-braid shielding

A CMG-rated PVC jacket surrounds 19 conductors of 28 AWG wire wrapped in aluminum-Mylar foil and braid. Nickel-plated contacts resist corrosion while the moulded latching shells provide strain relief. The construction meets DisplayPort 1.2 standards and carries DPCP and HDCP content protection.

Upgrades from non-latching or shorter cables

The latching design prevents accidental disconnection in busy racks or multi-monitor arms where vibration is common. It replaces basic friction-fit cables when a positive lock is required. Buyers who need runs longer than 6.6 ft or a right-angle connector should look elsewhere.

Highlights

  • Secure 4K connection up to 21.6 Gbps with HBR2 bandwidth
  • Latching male connectors prevent accidental disconnection during use
  • 6 ft length fits typical desktop-to-monitor setups
  • Shielded 28 AWG conductors reduce signal interference
  • CMG fire rating meets general-purpose installation requirements

Specifications

BrandStarTech.com
ModelDISPL2M
TypeDisplayPort Cable
ColorBlack
Length6.60 ft.
Cable Length6.6 ft.
Connector Number2
Connector DetailConnector A: 1 x DisplayPort (20 pin) Latching Male
Connector B: 1 x DisplayPort (20 pin) Latching Male
Terminal GenderMale to Male
SpecificationsCable Jacket Type: PVC - Polyvinyl Chloride
Connector Plating: Nickel
Fire RatingA: CMG Rated (General Purpose)
Connector Style: Latching
Number of Conductors: 19
Wire Gauge: 28 AWG
ShieldingAluminum-Mylar Foil with Braid
FeaturesCreate high-resolution 4k x 2k connections with HBR2 support between your DisplayPort-equipped devices
High-resolution support of up to 4k x 2k
Support for High Bit Rate 2 (HBR2) bandwidth of up to 21.6 Gbps
Backward compatible with DisplayPort 1.1
Designed and manufactured to DisplayPort 1.2 standards
Supports the DPCP (DisplayPort Content Protection) standard in addition to HDCP
Molded latching connectors with strain relief
Shipping weight0.18 kg
Package size152 × 102 × 51 mm

Questions about this item

How do I connect the 20-pin latching DisplayPort plugs without damaging the latch?

Align the connector with the port, push straight in until the latch clicks, then pull the release tab before unplugging to avoid bending the latch mechanism.

Will the nickel-plated contacts or PVC jacket degrade and need replacement?

The nickel plating and CMG-rated PVC jacket are passive components; they do not wear out under normal indoor use, so no scheduled replacement is required.

At what point does the 28 AWG conductor limit 4K 21.6 Gbps signal integrity over the 6.6 ft run?

The cable is built to DisplayPort 1.2 HBR2 specifications, so the 6.6 ft length stays within the standard's signal-integrity envelope for 21.6 Gbps.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.