We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pair of black steel 1U vented cantilever shelves 6 inches deep with adjustable lips and mounting hardware

StarTech.com DSRS6V2 1U vented cantilever server rack shelf 6" deep 2 pack

SKU CH-JC8Z-JGSMX MPN DSRS6V2

Two 1U vented cantilever shelves fit 19" racks, support 44 lb loads, and include mounting hardware

  • Rack Units42U
  • ColorBlack
  • MaterialSteel
  • Specification6V2PC, Alloy Steel, Rack Mount, 19 L x 6 W x 1.73 H inches
  • FeaturesRack Mount / Alloy Steel / Server / true / 6V2PC / black
  • Industry Standard6V2PC
  • 1U height fits standard 19" racks
  • 6" (152 mm) depth saves cabinet space
  • Slotted vents maximise airflow to prevent overheating
  • Lip installs up or down for flexible equipment support
  • 44 lb capacity with 1.2 mm steel sides

1U vented cantilever shelf 6" deep

Two 1U vented cantilever shelves mount in any standard 19-inch rack. Each shelf is 6 inches deep and made from 1.2mm thick steel with a 44-pound load rating. Slotted vents promote airflow through the rack. Mounting hardware includes M6 screws with cage nuts and M5 screws with nuts.

Lip-up or lip-down assembly for flexible mounting

The disassembled design lets you choose a front lip of 0.56 inches and a rear lip of 1 inch, or flip the lips downward for a flush surface. An extra front stiffener adds rigidity when the lip faces down. Builders who need deeper shelves or higher weight capacity should look elsewhere.

6-inch depth holds compact gear with 44-pound limit

The 152mm depth accommodates patch panels, small switches and shallow appliances while leaving rear cable room. Maximum load is 44 pounds per shelf. Heavier servers or deeper equipment will exceed the rated capacity.

Highlights

  • 1U height fits standard 19" racks
  • 6" (152 mm) depth saves cabinet space
  • Slotted vents maximise airflow to prevent overheating
  • Lip installs up or down for flexible equipment support
  • 44 lb capacity with 1.2 mm steel sides

Specifications

BrandStarTech.com
ModelMFT-VW04UBB
Part NumberMFT-DSRS6
Rack Units42U
ColorBlack
MaterialSteel
Specification6V2PC, Alloy Steel, Rack Mount, 19 L x 6 W x 1.73 H inches
FeaturesRack Mount / Alloy Steel / Server / true / 6V2PC / black
Industry Standard6V2PC
Unit Dimension19 in x 6 in x 1.73 in
Unit Weight1.67 kilograms
Shipping Dimension3.1 cm x 16.6 cm x 44.7 cm
Shipping Weight1.67 kilograms

Questions about this item

Do I need a 19-inch rack or cabinet to mount these shelves?

Yes, each shelf is built for standard 19-inch racks and cabinets and includes M6 screws with cage nuts for mounting.

Will the 152 mm depth fit alongside deeper equipment already in my rack?

The 152 mm deep shelf sits in a single 1U space, leaving room behind it for deeper servers or switches you keep installed.

How can I verify the shelf is holding its rated load after installation?

Load equipment up to 44 pounds and confirm the 1.2 mm thick steel sides show no flex or bowing.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.