We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black open-frame 4U wall-mount rack, 19in wide, 14in deep, powder-coated steel

StarTech.com 4U Wall Mount Rack 14in Depth 19in 42U Black

SKU CH-T91G-GZ7VP

4U open-frame wall-mount rack holds 19-inch shallow IT gear with 14-inch depth and 110 lb capacity

  • Rack Units42U
  • ColorBlack
  • Specification4U/Classic, 13.8 L x 19.3 W x 7.2 H inches
  • FeaturesAT / false / 3 Year Manufacturer / 4U/Classic / Black
  • Industry Standard4U/Classic
  • Included Accessoryfalse
  • Holds 42U of 19in equipment in a 14in deep frame
  • Supports 110lbs of gear with cold-rolled steel construction
  • EIA-310-E compliant for universal 19in rack compatibility
  • Wall-mount or under-desk installation with no assembly required
  • Open-frame design allows quick cable routing and equipment access

4U Wall Mount Rack 14in Depth

This 4U wall mount rack provides 42U of rack space in a shallow 14 inch depth. It is built from cold rolled steel with an electrostatic powder coat finish in black. The unit measures 13.8 x 19.3 x 7.2 inches and weighs 5.29 pounds. It supports a weight capacity of 110lbs (50kg) for mounted equipment.

Suits Shallow Network Gear Not Deep Servers

The 14 inch maximum mounting depth fits network switches, patch panels and shallow IT hardware. It is EIA/ECA-310-E compliant for standard 19 inch equipment. Installers who need to mount deeper servers or blade chassis should look at deeper cabinets. The open frame allows easy cable access on side panels.

Steel Frame Handles Continuous Load

Cold rolled steel construction maintains rigidity under the full 50kg rating during sustained operation. Powder coating resists corrosion in long-term installations. The rack ships fully assembled for immediate wall mounting or vertical under-table placement. Hardware and instructions are included for secure fixing.

Highlights

  • Holds 42U of 19in equipment in a 14in deep frame
  • Supports 110lbs of gear with cold-rolled steel construction
  • EIA-310-E compliant for universal 19in rack compatibility
  • Wall-mount or under-desk installation with no assembly required
  • Open-frame design allows quick cable routing and equipment access

Specifications

BrandStarTech.com
Rack Units42U
ColorBlack
Specification4U/Classic, 13.8 L x 19.3 W x 7.2 H inches
FeaturesAT / false / 3 Year Manufacturer / 4U/Classic / Black
Industry Standard4U/Classic
Included Accessoryfalse
Unit Dimension13.8 in x 19.3 in x 7.2 in
Unit Weight5.29 pounds
Shipping Dimension11.303 cm x 20.0914 cm x 41.783 cm
Shipping Weight2.649 kilograms

Questions about this item

What 19-inch equipment do I need to fill the 4U rack space?

Any EIA-310 compliant 19-inch device — patch panels, shallow switches, or short-depth servers — that fits within the 14-inch maximum mounting depth and stays under the 110 lb total limit.

Will my existing 19-inch patch panels and switches fit the 14-inch depth?

Yes, provided each unit is no deeper than 14 inches; the open frame accepts standard 19-inch gear that meets the EIA-310 hole pattern.

How do I confirm the rack is safely mounted after installation?

Verify all wall anchors are seated in studs or rated masonry fixings, confirm the unit sits level, and ensure the loaded weight does not exceed 110 lb.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.