We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White 20-foot Cat6 UTP patch cable with molded RJ45 connectors and strain relief

StarTech.com 20ft White Cat6 UTP Patch Cable ETL Verified

SKU CH-NKC0-4ZZQ3

A 20-foot Cat6 UTP patch cable with 24 AWG copper conductors, 250 MHz rating, and 50-micron gold-plated RJ45 connectors for 10 Gbps up to 160 feet and 100 W PoE support

  • TypeEthernet
  • Cat6
  • Connector ACategory 6
  • ColorWhite
  • Features, , , ,
  • Supports 1/2.5/5 Gbps speeds with 10 Gbps up to 160 ft
  • Delivers up to 100 W PoE power for VoIP phones and security systems
  • 50-micron gold-plated connectors resist corrosion to prevent network downtime
  • ETL verified to ANSI/TIA-568.2-D standards for reliable Category 6 performance
  • 20 ft molded PVC jacket with strain relief simplifies high-density panel installation

High-performance Cat6 patch cable

This 20-foot white Cat6 UTP patch cable uses 100 percent copper conductors for error-free multi-gigabit connections. It supports 1, 2.5 and 5 Gbps speeds with 10 Gbps capability up to 160 feet. The cable is individually tested to comply with ANSI/TIA-568.2-D Category 6 standards and ETL verified for reliable network performance.

Installation requirements and compatibility

Verify that your network equipment uses standard RJ45 connectors and follows the T568B wiring scheme. The 24 AWG stranded copper construction supports up to 100W PoE for devices such as VoIP phones and security cameras. Ensure your pathway can accommodate a 20-foot molded patch cord with a PVC jacket designed for high-density panel connections.

Upgrade scenarios and limitations

This cable replaces older Cat5e or lower-category patch cords when higher bandwidth and reduced crosstalk are needed. The 250 MHz rating and gold-plated connectors provide a measurable jump for multi-gigabit links and PoE deployments. It is not suited for runs exceeding 160 feet at 10 Gbps or for installations requiring shielded cable in high-interference environments.

Highlights

  • Supports 1/2.5/5 Gbps speeds with 10 Gbps up to 160 ft
  • Delivers up to 100 W PoE power for VoIP phones and security systems
  • 50-micron gold-plated connectors resist corrosion to prevent network downtime
  • ETL verified to ANSI/TIA-568.2-D standards for reliable Category 6 performance
  • 20 ft molded PVC jacket with strain relief simplifies high-density panel installation

Specifications

BrandStarTech.com
Model20ft White Cat6 UTP Patch Cable ETL Verified
TypeEthernet
Cat6
Connector ACategory 6
ColorWhite
Features, , , ,

Questions about this item

Does the 20 ft white Cat6 patch cable include any separate adapters or tools?

The cable is a single 20 ft moulded patch cord with RJ45 plugs on both ends; no adapters or tools are included or required.

Should I choose the 20 ft length or a different length for a 10 Gbps run?

The cable supports 10 Gbps up to 160 ft, so the 20 ft version is well within that limit; select a longer cable only if the physical distance demands it.

What does the 250 MHz rating mean for actual throughput on my network?

The 250 MHz bandwidth supports 1/2.5/5 Gbps and 10 Gbps up to 160 ft, delivering full Category 6 performance for typical desktop and PoE connections.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.