STARTECH
STARTECH CBMWD3825 Cable Management Raceway 78
A 78-inch slotted raceway routes and conceals cables in offices or server rooms with 25 mm by 38 mm dimensions and 8 mm finger ducts for easy cord access
- Neatly routes cables with 78 in slotted raceway
- Conceals cords for professional look using 1.5 in x 1 in channel
- Protects cables from damage via .3 in finger duct slots
- Mounts securely to wood or drywall with 15 mm x 5 mm holes
- Fire resistant M1 rated self-extinguishing PVC with 86 C Vicat softening point
Cable raceway for office and server rooms
This 6.5 ft slotted cable management raceway routes and conceals cords in offices or server rooms. It measures 1 in by 1.5 in with 0.3 in parallel slots that allow cables to be pulled through easily. The design protects cables from damage while keeping installations tidy and professional.
Simple mounting with screws required
Mounting holes sized 15 mm by 5 mm let you secure the raceway to wood or drywall using screws that are not included. The self-extinguishing PVC construction is sturdy and warp-proof, with an M1 NF fire rating and UL 94V-0 rating. Installation is straightforward but does require a drill and suitable fasteners for the mounting surface.
Suits installers needing fire-rated trunking
This raceway fits IT professionals who want a TAA-compliant, UL 94V-0 rated channel for permanent cable runs. Buyers who need adhesive-backed trunking, tool-less snap-on covers, or a shorter length for desk use should look at something else. The lifetime warranty and 24/5 technical support back the product for long-term deployments.
Highlights
- Neatly routes cables with 78 in slotted raceway
- Conceals cords for professional look using 1.5 in x 1 in channel
- Protects cables from damage via .3 in finger duct slots
- Mounts securely to wood or drywall with 15 mm x 5 mm holes
- Fire resistant M1 rated self-extinguishing PVC with 86 C Vicat softening point
Specifications
No published specifications for this item yet.
Questions about this item
How can I confirm the raceway is properly installed after mounting?
The raceway should sit flush against the wall with cables routed through the 0.3 in. parallel slots and secured by screws through the 15mm x 5mm mounting holes.
What comes in the box and what must I supply for installation?
The kit includes the 78 in. PVC raceway with slotted finger ducts; you must provide your own screws for the 15mm x 5mm mounting holes.
Which capacity suits a standard office run — the 6.5 ft. length or a shorter section?
The single 6.5 ft. (2 m) raceway covers most desk-to-ceiling or rack-to-floor runs; cut it to length if a shorter section is needed.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



