We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue Cat 6 Ethernet cable with moulded RJ45 plugs, 7 ft

STARTECH

STARTECH C6PATCH7BL network ethernet cable 7 ft Cat 6 Blue

SKU CH-DTMM-FDK6P MPN C6PATCH7BL

A 7 ft Cat 6 UTP patch cable with RJ-45 connectors supporting up to 10 Gbps at 250 MHz over 160 ft, 24 AWG stranded copper, 100 W PoE and UL-rated wire

  • Typeothers
  • Cat6
  • Connector A1 x RJ-45 Male
  • Connector B1 x RJ-45 Male
  • Length7 ft.
  • ColorBlue
  • Supports 10 Gbps up to 160 ft with 250 MHz bandwidth
  • 24 AWG stranded 100 % copper ensures reliable signal integrity
  • Molded strain relief protects connector from sharp-angle stress
  • UL rated wire with ETL verification meets safety standards
  • Delivers 100 W PoE for power-hungry network devices

7 ft Cat 6 patch cable

This 7 ft Cat 6 patch cable uses 24 AWG stranded 100% copper conductors rated to 250 MHz. Molded RJ-45 connectors on both ends include strain relief to reduce stress at the plug termination point. The blue jacket is UL listed under E132276-A and ETL verified for safety compliance.

Upgrade from Cat 5e for multi-gigabit

Replacing a Cat 5e cord with this Cat 6 cable enables 2.5 Gbps and 5 Gbps operation alongside standard 1 Gbps and 10 Gbps links. The jump is worth it when switches, routers or NAS devices support multi-gigabit ports and the run stays within the rated distance. Existing Cat 5e cables remain adequate for 1 Gbps-only equipment.

10 Gbps limited to 160 ft

The Cat 6 standard supports 10 Gbps only up to 160 ft; longer runs drop to 1 Gbps regardless of cable quality. PoE delivery is rated to 100 W, so high-power devices such as pan-tilt-zoom cameras or access points can be powered over the same conductors. Installations needing 10 Gbps beyond 160 ft require Cat 6a or higher cabling.

Highlights

  • Supports 10 Gbps up to 160 ft with 250 MHz bandwidth
  • 24 AWG stranded 100 % copper ensures reliable signal integrity
  • Molded strain relief protects connector from sharp-angle stress
  • UL rated wire with ETL verification meets safety standards
  • Delivers 100 W PoE for power-hungry network devices

Specifications

BrandStarTech.com
ModelC6PATCH7BL
Typeothers
Cat6
Connector A1 x RJ-45 Male
Connector B1 x RJ-45 Male
Length7 ft.
ColorBlue
FeaturesStarTech Category 6 Patch cables are constructed with top quality components
The Strain relief prevents the cable from being bent at sharp angles at the connector to minimize the stress at the plug termination point
Coloured Hoods for departmental colour coding
StarTech Category 6 patch cables are carefully constructed and tested, to keep the Near End Crosstalk (NEXT) well within acceptable limits
Shipping weight0.10 kg
Package size220 × 198 × 23 mm

Questions about this item

What connector type does the C6PATCH7BL use for each end?

The cable has an RJ-45 male connector on both ends, so it plugs straight into any standard Ethernet port on a router, switch or network card.

How do I install the cable without damaging the plug termination?

Route the cable so the molded strain-relief boot is not forced into a sharp bend; the boot is designed to keep the cable from kinking right at the connector.

Will the cable support 100 W Power over Ethernet after extended use?

The 24 AWG 100 % copper conductors are rated for 100 W PoE, and the UL-rated jacket (E132276-A) maintains that capacity over the cable's service life.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

More in Network Ethernet Cables

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.