We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White Cat6A Ethernet cable, three feet long, with booted RJ45 connectors

Nippon Labs

Nippon Labs 60CAT6A-3WT Cat6A network ethernet cable 3 ft white 24AWG

SKU CH-CE18-4RTTF MPN 60CAT6A-3WT

Three-foot Cat6A UTP patch cable with 24 AWG stranded copper, gold-plated RJ45 connectors and snagless boots for 10 Gigabit Ethernet up to 100 metres

  • TypeNetwork Ethernet Cables
  • Cat6A
  • Connector ARJ45
  • Connector BRJ45
  • Length3 ft.
  • ColorWhite
  • Supports 10 Gigabit Ethernet up to 100 metres
  • Operates at a minimum frequency of 500 MHz for high data rates
  • 24 AWG stranded pure copper conductors enhance signal quality
  • Gold-plated contacts with snagless boots resist corrosion and ensure secure fit
  • Compliant with TIA/EIA standards by UL and ETL; RoHS compliant

3 ft Cat6A patch cable for 10 Gigabit Ethernet

This 3 ft Cat6A UTP patch cable carries 10, 100, 1000 and 10000Base-T signals up to the full 100 metre channel limit. It uses 24 AWG stranded pure copper conductors and gold-plated RJ45 contacts to maintain a minimum 500 MHz bandwidth. The white CM-rated PVC jacket suits indoor rack or desk runs where 10 Gigabit performance is required.

Snagless boots and T568B wiring simplify

Molded strain-relief boots and snagless tabs protect the latch during repeated insertion, while the T568B pinout matches standard patch-panel and switch wiring. As an unshielded cable it does not require grounding, but it must be kept away from strong EMI sources that could degrade the 550 MHz rated margin. The short 3 ft length leaves no slack for routing errors, so measure the exact path before ordering.

Suits short 10GbE links in clean environments

Builders wiring a server, switch or workstation over a very short distance will appreciate the certified 10 Gigabit headroom and snagless durability. Installers needing shielded cable for noisy industrial areas, PoE++ thermal margins beyond the basic CM jacket, or runs longer than a few feet should select a different construction.

Highlights

  • Supports 10 Gigabit Ethernet up to 100 metres
  • Operates at a minimum frequency of 500 MHz for high data rates
  • 24 AWG stranded pure copper conductors enhance signal quality
  • Gold-plated contacts with snagless boots resist corrosion and ensure secure fit
  • Compliant with TIA/EIA standards by UL and ETL; RoHS compliant

Specifications

BrandNippon Labs
Model60CAT6A-3WT
TypeNetwork Ethernet Cables
Cat6A
Connector ARJ45
Connector BRJ45
Length3 ft.
ColorWhite
ShieldedNo
Wire Gauge24 AWG
FeaturesCat.6A patch cable is used in network applications such as 10Base-T, 100Base-T, 1000Base-T, 10,000Base-T Ethernet up to 100 meters (328 feet).
They are designed specifically for 10 Gigabit Ethernet applications over copper.
They perform at high-data transfer rates and operate at a minimum frequency of 500 MHz.
These cables deliver improved performance over standard Cat.6 cables.
Compliant with TIA/EIA standard by UL and ETL; RoHS Compliant
4-pair UTP (Unshielded Twisted Pair) 24 AWG stranded pure copper wire & T568B standard
High Performance RJ45 Ethernet Patch Cable provides univers
Shipping weight0.09 kg
Package size152 × 127 × 25 mm

Questions about this item

How can I confirm the cable is operating at the rated 500 MHz frequency after installation?

Use a cable certifier or network tester that reports frequency response up to 500 MHz and verifies 10,000Base-T link negotiation.

What is included with the 3 ft white Cat6A cable and what must be purchased separately?

The cable arrives with RJ45 connectors on both ends, gold-plated contacts, molded strain-relief boots and snagless molds; no additional components are required for a standard patch connection.

Which version of this Cat6A cable should I choose for a 10 Gigabit Ethernet run up to 100 meters?

This 24 AWG UTP patch cable with 50 micron gold contacts and T568B wiring meets the 550 MHz rating and supports 10,000Base-T over the full 100 metre channel.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.