We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black Cat6 patch cable seven feet long with molded RJ45 connectors and gold contacts

STARTECH

STARTECH C6PATCH7BK 7 ft Cat6 network ethernet cable 24 AWG 250 MHz 10Gbps

SKU CH-HFV9-47THQ MPN C6PATCH7BK

A 7 ft black Cat6 patch cable with gold-plated RJ-45 connectors, 24 AWG stranded copper and 250 MHz bandwidth for 10 Gbps up to 160 ft

  • Typeothers
  • Cat6
  • Length7 ft.
  • ColorBlack
  • FeaturesColored Hoods for departmental color coding StarTech Categor
  • Supports 10 Gbps up to 160 ft with 250 MHz bandwidth
  • 24 AWG stranded 100 % copper conductors ensure reliable signal integrity
  • Gold-plated RJ-45 contacts resist corrosion for lasting connectivity
  • Molded strain-relief boots protect against bend damage during installation
  • Handles 100 W PoE to power devices through the cable

7 ft Cat6 cable for 10 Gbps links

This 7-foot Category 6 patch cord uses 24 AWG stranded copper conductors rated to 250 MHz. Gold-plated RJ-45 connectors on both ends support 1/2.5/5 Gbps and 10 Gbps speeds up to 160 ft. Molded strain-relief boots protect the terminations during repeated insertion cycles. The cable carries a UL E132276-A listing and is rated for 100 W Power over Ethernet.

Suited for short patch runs and PoE devices

Installers connecting switches, routers, access points or IP cameras within a rack or across a desk will find the length convenient. Buyers needing longer horizontal runs, outdoor-rated jackets or fibre links should look at other products. The black jacket and coloured hoods aid visual identification in dense panels.

250 MHz bandwidth enables 10 Gbps to 160 ft

The 250 MHz rating is the single figure that determines whether the cable meets a 10 GBASE-T requirement at this length. If the installation demands certified performance beyond 160 ft or a higher frequency class, this cable will not satisfy that need.

Highlights

  • Supports 10 Gbps up to 160 ft with 250 MHz bandwidth
  • 24 AWG stranded 100 % copper conductors ensure reliable signal integrity
  • Gold-plated RJ-45 contacts resist corrosion for lasting connectivity
  • Molded strain-relief boots protect against bend damage during installation
  • Handles 100 W PoE to power devices through the cable

Specifications

BrandStarTech.com
ModelC6PATCH7BK
Typeothers
Cat6
Length7 ft.
ColorBlack
FeaturesColored Hoods for departmental color coding
StarTech Category 6 patch cables are carefully constructed and tested, to keep the Near End Crosstalk (NEXT) well within acceptable limits
StarTech Category 6 Patch cables are constructed with top quality components
The Strain relief prevents the cable from being bent at sharp angles at the connector to minimize the stress at the plug termination point
Shipping weight0.10 kg
Package size193 × 161 × 25 mm

Questions about this item

How far can this Cat6 cable run at 10 Gbps before performance drops?

The cable supports 10 Gbps up to 160 ft, so a 7 ft length stays well within that limit.

Does the 24 AWG copper construction handle 100 W PoE without overheating during all-day use?

Yes, the UL-rated 24 AWG stranded copper is specified for 100 W PoE, keeping heat and power loss low in continuous operation.

Will the gold-plated RJ-45 connectors fit my existing keystone jacks and switch ports?

The cable terminates in standard RJ-45 male plugs with gold contacts, compatible with any Cat6 or Cat5e keystone jack and network switch port.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.