Belkin A3L791-06 network ethernet cable Cat 5E 6 ft Gray
- Consumer Electronics
- 5E
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
STARTECH
Category 6 patch cable with RJ-45 male connectors on both ends, 5 ft gray, ETL verified, 24 AWG stranded copper, 250 MHz bandwidth, supports 10 Gbps up to 160 ft and 100 W PoE
This five-foot Category 6 patch cable uses 24 AWG stranded copper conductors and RJ-45 male connectors on both ends. The molded strain-relief boots and coloured hoods protect the terminations during repeated insertion. It is rated for 250 MHz bandwidth and supports multi-gigabit speeds up to 10 Gbps over short runs. ETL, FCC and CSA certifications confirm compliance with EIA/TIA-568B wiring standards.
Verify that the five-foot length reaches between your switch, router or wall jack and the target device without tension. Ensure both ports accept standard RJ-45 plugs and that the pathway can accommodate the molded boot diameter. The cable is unshielded UTP, so keep it clear of high-voltage lines or sources of strong electromagnetic interference. Confirm the equipment supports the desired link speed before expecting multi-gigabit throughput.
At the full 160-foot channel limit the cable maintains 10 Gbps performance thanks to its 250 MHz rating and solid copper construction. The 100 W Power over Ethernet capability delivers continuous power without voltage drop on compatible endpoints. Stranded conductors resist fatigue when the patch cord is routed through cable management or moved during maintenance. ETL verification ensures consistent attenuation and crosstalk margins under continuous load.
| Brand | StarTech.com |
|---|---|
| Model | C6PATCH5GR |
| Type | others |
| Cat | 6 |
| Connector A | 1 x RJ-45 Male |
| Connector B | 1 x RJ-45 Male |
| Length | 5 ft. |
| Color | Gray |
| Features | Cable Type: Category 6 Cable Characteristic: Patch Cable Features: Molded Conductor: Copper Additional Information: Colored hoods Strain relief Certifications & Standards: ETL FCC CSA EIA/TIA-568B |
| Shipping weight | 0.07 kg |
| Package size | 211 × 199 × 23 mm |
Both ends are factory-terminated with RJ-45 male plugs and coloured hoods, so nothing extra is required.
The cable supports all four rates; the link speed is negotiated by the switch or NIC at each end.
At 5 ft the cable easily meets the 250 MHz bandwidth needed for 10 Gbps and 100 W PoE.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
More in Network Ethernet Cables
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?