We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White Cat 6 Ethernet cable with moulded RJ45 connectors, four feet long

STARTECH

STARTECH C6PATCH4WH 4 ft Cat 6 network ethernet cable

SKU CH-ZSM0-7GZ5B MPN C6PATCH4WH

A four-foot Cat 6 patch cable with moulded RJ-45 connectors, 24 AWG stranded copper conductors, 250 MHz bandwidth and 100 W PoE support

  • Typeothers
  • Cat6
  • Connector A1 x RJ-45 Male Network
  • Connector B1 x RJ-45 Male Network
  • Length4 ft
  • ColorWhite
  • Cat 6 rating supports up to 10 Gbps over short runs
  • 24 AWG stranded copper conductors ensure reliable signal integrity
  • Molded strain-relief boots protect the RJ-45 connectors from damage
  • ETL verified and UL listed (E132276-A) for safety compliance
  • 100 W Power over Ethernet capability powers devices through the cable

Ideal for tight rack links

This 4 ft Cat 6 patch cord is built for short horizontal runs between a switch and a server or patch panel. White jacketing keeps cable management clean in dense cabinets, and the moulded strain relief withstands frequent re-patching in data-centre and office environments.

Fits standard RJ-45 ports

Both ends terminate in male RJ-45 connectors that plug directly into any Gigabit or Multi-Gig port without adapters. The 24 AWG stranded 100 % copper conductors (UL E132276-A) remain flexible for routing through tight cable managers, while the UTP construction eliminates the need for separate grounding hardware.

Replaces older Cat 5e jumpers

When 1 Gbps links bottleneck at 2.5 or 5 Gbps, this cable supports 10 Gbps up to 160 ft at 250 MHz, so the upgrade pays off immediately. It also carries 100 W PoE, removing the separate power injectors that legacy patch cords cannot handle. Not suited for installers who need in-wall rated or outdoor jacketed cable.

Highlights

  • Cat 6 rating supports up to 10 Gbps over short runs
  • 24 AWG stranded copper conductors ensure reliable signal integrity
  • Molded strain-relief boots protect the RJ-45 connectors from damage
  • ETL verified and UL listed (E132276-A) for safety compliance
  • 100 W Power over Ethernet capability powers devices through the cable

Specifications

BrandStarTech.com
ModelC6PATCH4WH
Typeothers
Cat6
Connector A1 x RJ-45 Male Network
Connector B1 x RJ-45 Male Network
Length4 ft
ColorWhite
FeaturesFeatures:Molded
Cable Characteristic:Patch Cable
Shipping weight0.06 kg
Package size196 × 196 × 17 mm

Questions about this item

What is the maximum 10 Gbps distance this Cat 6 cable supports?

The cable delivers 10 Gbps speeds up to 160 ft as specified by the manufacturer.

How much power can the cable carry for Power over Ethernet devices?

It supports up to 100 W PoE for powering compatible network equipment.

Which connectors are required on the devices to use this patch cord?

Both ends use RJ-45 male connectors, so each device needs an RJ-45 female port.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.