STARTECH
STARTECH C6PATCH1BL10PK CAT6 UTP network patch cable blue 10 pack
A ten-pack of one-foot Category 6 UTP patch cables with 24 AWG solid copper conductors and 50-micron gold RJ45 contacts
- Reliable Gigabit networking with Category 6 compliant cables
- Pure copper conductors avoid CCA overheating risks
- Gold-plated contacts resist corrosion for lasting signal quality
- 24 AWG wire supports PoE and high-definition video
- Moulded strain-relief boots protect connectors from sharp bends
Reliable Gigabit Network Cabling
This ten-pack of Cat 6 UTP patch cables meets Category 6 specifications for dependable Gigabit Ethernet links. Each cable uses 100% copper conductors instead of copper-clad aluminium, avoiding the heat and power-delivery risks that inferior wire can cause.
Gold-Plated Connectors for Clean Signals
Fifty-micron gold contacts on every RJ45 plug prevent oxidation and corrosion that degrade signal quality over time. The 24 AWG copper construction keeps near-end crosstalk within limits, supporting demanding tasks such as Power-over-Ethernet and 1080p or 4K video streaming.
Moulded Strain-Relief Boots
Durable moulded boots stop the connectors from bending at sharp angles during installation, reducing the chance of damage that would interrupt connectivity. The design makes cable runs easier to manage while protecting the wiring inside each one-foot patch lead.
Highlights
- Reliable Gigabit networking with Category 6 compliant cables
- Pure copper conductors avoid CCA overheating risks
- Gold-plated contacts resist corrosion for lasting signal quality
- 24 AWG wire supports PoE and high-definition video
- Moulded strain-relief boots protect connectors from sharp bends
Specifications
No published specifications for this item yet.
Questions about this item
How do I install these 1 ft Cat6 cables without damaging the RJ45 connectors?
Align each RJ45 plug with the port and push straight in until the tab clicks; the molded boot prevents the connector from bending at sharp angles, so avoid forcing the cable sideways during insertion.
What maintenance or replacement will these Cat6 patch cables need over time?
The 50-micron gold contacts resist oxidation and corrosion, eliminating signal loss from contact degradation; no routine maintenance is required unless a boot tears or a connector tab breaks, at which point the individual cable should be replaced.
What limit appears first when these 24 AWG Cat6 cables run Power-over-Ethernet continuously?
The 24 AWG copper conductors set the current-carrying capacity; sustained PoE loads that exceed the gauge rating will cause heat buildup before any crosstalk or signal-integrity issue arises.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



