anicorn ADP-200JB D 200W 20V 10A 6.0 x 3.7mm AC Adapter Charger
- AC Adapter
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
STARTECH
15 ft Cat6 patch cable supports up to 10 Gbps and 100 W PoE with 24 AWG copper conductors
This 15 ft Cat6 patch cable connects network devices using RJ45 connectors on both ends. The purple jacket provides easy visual identification in crowded racks or cable runs. It suits home offices, small-business networks or anyone needing a reliable wired link without wireless interference. Builders who need longer runs beyond 160 ft for 10 Gbps or who require shielded construction should look elsewhere.
The cable is rated at 250 MHz and carries 1/2.5/5 Gbps and 10 Gbps speeds up to 160 ft using 24 AWG stranded 100 % copper conductors. UL-rated wire (E132276-A) and ETL verification ensure consistent signal quality. Power over Ethernet devices draw up to 100 W through the same conductors, eliminating separate power adapters for access points or cameras. No active cooling or external power supply is involved.
Molded strain-relief boots protect the RJ45 plugs during repeated insertion and removal. The unshielded twisted-pair construction keeps the cable flexible for routing through tight pathways or around corners. It plugs directly into switches, routers, patch panels or PoE endpoints without adapters. Installers who need shielded cable for high-EMI environments or who require a different connector type will need an alternative product.
| Brand | StarTech.com |
|---|---|
| Model | C6PATCH15PL |
| Type | Cables - Round |
| Cat | 6 |
| Connector A | RJ45 |
| Connector B | RJ45 |
| Length | 15 ft. |
| Color | Purple |
| Features | Add two RS232 serial ports to any system with an available USB motherboard header - USB to Serial - USB to RS232 - USB to DB9 - USB to serial Adapter - USB to serial port Direct connection from the motherboard header allows for a clean and completely contained setup without taking up a PCI/PCI-Express slot in your system Standard and low profile/half-height bracket included to ensure fitment in any system Extensive list of OS support and Microsoft WHQL certified drivers makes for maximum compatibility and simple installation Single chip USB to asynchronous serial data transfer interf |
| Shipping weight | 3.18 kg |
| Package size | 406 × 305 × 279 mm |
Align the RJ45 tab with the port notch and push until it clicks; the step people miss is confirming the latch is fully seated so the 24 AWG stranded copper cores maintain 250 MHz performance.
Inspect the molded boots and RJ45 contacts periodically; replace the cable if the latch breaks, the jacket kinks, or PoE devices negotiate below 100 W due to worn 100 % copper conductors.
The 100 W PoE ceiling is reached before the 250 MHz bandwidth or 160 ft 10 Gbps distance rating, so attached devices cannot draw more than 100 W continuously.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?