We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White Cat6 patch cable, ten feet long, with molded RJ45 plugs on both ends

STARTECH

STARTECH C6PATCH10WH 10 ft Cat6 network ethernet cable

SKU CH-MCX3-51SNZ MPN C6PATCH10WH

A 10 ft white Cat6 patch cable with RJ45 connectors, 24 AWG stranded copper conductors, 500 MHz rating and 100 W PoE support

  • TypeNetwork Cable
  • Cat6
  • Connector ARJ45
  • Connector BRJ45
  • Length10 ft.
  • ColorWhite
  • 10 ft Cat6 cable supports 10 Gbps up to 160 ft
  • 24 AWG 100 % copper conductors ensure reliable signal
  • 500 MHz bandwidth handles multi-gigabit 1/2.5/5 Gbps speeds
  • 100 W PoE capability powers devices over the same cable
  • ETL verified and UL rated for safety compliance

White Cat6 patch cable

This 10 ft white Cat6 patch cable uses 24 AWG stranded copper conductors in a 4 pair UTP construction. It is terminated with RJ45 connectors on both ends and follows the TIA/EIA-568-B.1-2001 T568B wiring standard. The cable carries a 500 MHz bandwidth rating and supports Power over Ethernet up to 100W. It is built for installers and IT staff who need reliable structured cabling runs.

Suited for fixed desk or rack runs

The moulded strain relief and 10 ft length make it practical for permanent desk-to-switch or patch-panel connections where a white jacket aids cable identification. Buyers who need longer horizontal runs beyond 160 ft for 10 Gbps operation or who require shielded cable for high-EMI environments should look at alternative constructions. The unshielded design also means it is not intended for outdoor or direct-burial use.

Sustained 10 Gbps throughput to 160 ft

Under continuous load the 250 MHz rated cable maintains 10 Gbps signal integrity up to 160 ft, while multi-gigabit rates of 1, 2.5 and 5 Gbps are supported over the same distance. The 100% copper conductors and UL-rated jacket (E132276-A) resist heat build-up during prolonged PoE delivery at 100W. ETL verification confirms the cable meets the 500 MHz Cat6 specification for consistent performance.

Highlights

  • 10 ft Cat6 cable supports 10 Gbps up to 160 ft
  • 24 AWG 100 % copper conductors ensure reliable signal
  • 500 MHz bandwidth handles multi-gigabit 1/2.5/5 Gbps speeds
  • 100 W PoE capability powers devices over the same cable
  • ETL verified and UL rated for safety compliance

Specifications

BrandStarTech.com
ModelC6PATCH10WH
TypeNetwork Cable
Cat6
Connector ARJ45
Connector BRJ45
Length10 ft.
ColorWhite
FeaturesNetwork Cable Type: Molded
Number of Conductors: 4 Pair UTP
Wire Gauge: 24 AWG
Cable Rating: CAT6 - 500 MHz
Wiring Standard: TIA/EIA-568-B.1-2001 T568B
Shipping weight0.15 kg
Package size196 × 193 × 22 mm

Questions about this item

What devices need RJ45 ports to use this 10 ft Cat6 cable?

Any network equipment with standard RJ45 jacks — routers, switches, PCs, NAS units, IP cameras or PoE access points — will connect directly.

Will this 24 AWG Cat6 patch cord run at 2.5 Gbps or 5 Gbps on my older Cat5e switch ports?

The cable supports 1/2.5/5 Gbps and 10 Gbps up to 160 ft, but the link speed is limited by the lowest-rated port, so a Cat5e switch will negotiate 1 Gbps.

How can I confirm the cable is delivering PoE power after I plug it in?

Check the powered device — an IP phone, camera or access point — for normal operation lights; the cable is rated for 100 W PoE and uses 100 % copper conductors.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.