STARTECH
STARTECH C6ASPAT7BK 7 ft Shielded Cat6a Network Ethernet Cable
A 7 ft shielded Cat6a patch cable with RJ-45 connectors for 10 Gigabit Ethernet free of noise and EMI/RFI interference
- TypeConsumer Electronics
- Cat6A
- Connector A1 - RJ-45 Male
- Connector B1 - RJ-45 Male
- Length7 ft.
- ColorBlack
- Supports 10 Gigabit Ethernet free of EMI/RFI interference
- Tested to ANSI/TIA-568-D Category 6 requirements for reliable performance
- 26 AWG stranded 100% copper UL rated wire ensures signal integrity
- Snagless shielded connectors prevent damage during installation
- Handles 100W PoE for powering devices over the network
STARTECH 7 ft Shielded Cat6a Patch Cable
This seven-foot shielded Cat6a patch cable carries 10 Gigabit Ethernet signals between two RJ-45 ports. The STP construction and full copper conductors suppress EMI and RFI noise in electrically noisy environments. It suits workstations, switches, or patch panels that need reliable 10 Gb links over short runs. Buyers who need longer permanent links or outdoor-rated jackets should look elsewhere.
Snagless RJ-45 Connectors With Molded Strain Relief
The molded boots protect the latch tab from catching during routing, while strain relief guards the solder points against bending stress. Simply push each connector until it clicks; no tooling is required. Installers who pull cables through tight conduit should verify the boot diameter fits their pathway before committing. The stranded 26 AWG conductors tolerate repeated flexing better than solid-core alternatives.
Category 6a Performance Limits
The cable is tested to ANSI/TIA-568-D Category 6 requirements and supports 10 Gb speeds up to the rated length. Shielding handles 100 W PoE loads without overheating the conductors. Beyond the specified distance, signal attenuation may degrade 10 Gb throughput, so longer permanent installations need solid-core cable rated for the full channel length.
Highlights
- Supports 10 Gigabit Ethernet free of EMI/RFI interference
- Tested to ANSI/TIA-568-D Category 6 requirements for reliable performance
- 26 AWG stranded 100% copper UL rated wire ensures signal integrity
- Snagless shielded connectors prevent damage during installation
- Handles 100W PoE for powering devices over the network
Specifications
| Brand | StarTech.com |
|---|---|
| Model | C6ASPAT7BK |
| Type | Consumer Electronics |
| Cat | 6A |
| Connector A | 1 - RJ-45 Male |
| Connector B | 1 - RJ-45 Male |
| Length | 7 ft. |
| Color | Black |
| Shielded | Yes |
| Features | Deliver high-performance 10Gb Ethernet connections free of noise and EMI/RFI interference 7ft Shielded Cat6a Cable / 7' STP Cat6a Cable / 10Gb Snagless Cat 6a Ethernet Patch Cable / 7 ft Black Cat6a Cable / Cat6a Patch Cable Protect your data against noise & EMI/RFI interference Prevent cable damage with molded RJ45 connectors with strain relief Create secured connections with snagless clips that protect the connectors during installation Guaranteed reliability |
| Shipping weight | 0.11 kg |
| Package size | 183 × 175 × 8 mm |
Questions about this item
How do I confirm the cable delivers a 10 Gbps link after installation?
Connect the RJ-45 plugs to 10 GbE ports and verify the link speed shows 10 Gbps in your OS or switch dashboard.
What comes in the package and what must I supply?
The box contains the 7 ft shielded Cat6a patch cord with snagless RJ-45 connectors; you provide the 10 GbE networking devices.
Which length and category should I select for a 10 GbE run up to 7 ft?
Choose this 7 ft Cat6a STP cable; it is tested to ANSI/TIA-568-D Category 6A and supports 10 Gbps over the full length.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



