Innovation First, Inc.
Innovation First, Inc. 1UCMA-137 1U Cable Management Arm 19" 28.5"-33" computer accessory
- Product Type:Cable…
- Panel Width:19" Rac…
$72.99
0.00084782BTC
In stock
STARTECH
STARTECH C6ASPAT7AQ network ethernet cable 7 ft aqua shielded Cat6a
A 7 ft aqua shielded Cat6a patch cable with snagless RJ45 connectors for 10 Gigabit Ethernet links
- TypeConsumer Electronics
- Cat6A
- Connector ARJ45
- Connector BRJ45
- Length7 ft.
- ColorAqua
- Delivers 10 Gigabit connections free of noise and EMI/RFI interference
- Tested to comply with ANSI/TIA-568-D Category 6 requirements
- 26 AWG stranded 100% copper UL rated wire E132276-A
- Supports 100W Power over Ethernet applications
- Snagless shielded patch cord with aqua PVC jacket
7 ft aqua Cat6a shielded patch cable
This 7 ft aqua Cat6a shielded patch cable uses RJ45 connectors on both ends and 26 AWG stranded copper conductors. The aluminum-polyester foil shielding blocks EMI and RFI noise. It is built for installers and network managers who need a short, colour-coded run that supports 10 Gigabit speeds and 100 W PoE.
Upgrade from unshielded Cat5e or Cat6 runs
Replacing an unshielded Cat5e or Cat6 patch cord with this shielded Cat6a cable removes a common bottleneck when 10 Gigabit links are required. The jump is worth it when the existing cable cannot pass alien-crosstalk tests or when PoE loads exceed the rating of the older cord. Buyers who need longer reach or a different jacket rating should look elsewhere.
Practical limits of the Cat6a UTP interface
The cable meets ANSI/TIA-568-D Category 6 requirements and carries a CMG fire rating for general-purpose indoor use. Shielding adds bulk, so the cord is less flexible than unshielded equivalents in tight cable managers. Maximum channel length remains governed by the Cat6a standard, so total link distance must stay within that limit.
Highlights
- Delivers 10 Gigabit connections free of noise and EMI/RFI interference
- Tested to comply with ANSI/TIA-568-D Category 6 requirements
- 26 AWG stranded 100% copper UL rated wire E132276-A
- Supports 100W Power over Ethernet applications
- Snagless shielded patch cord with aqua PVC jacket
Specifications
| Brand | StarTech.com |
|---|---|
| Model | C6ASPAT7AQ |
| Type | Consumer Electronics |
| Cat | 6A |
| Connector A | RJ45 |
| Connector B | RJ45 |
| Length | 7 ft. |
| Color | Aqua |
| Shielded | Aluminum-polyester foil |
| Features | Deliver high-performance 10 Gigabit network connections, free of noise and EMI / RFI interference Hardware Cable Jacket Type: PVC - Polyvinyl Chloride Cable Type: Shielded Snag-less Fire Rating: CMG Rated (General Purpose) Number of Conductors: 4 Pair STP Performance Cable Rating: CAT6a - 10 Gbit/s Physical Characteristics Conductor Type: Stranded Copper Wire Gauge: 26 AWG |
| Shipping weight | 0.11 kg |
| Package size | 152 × 102 × 51 mm |
Questions about this item
What are the connector types and cable length for this patch cord?
Both ends use RJ45 male connectors and the cable measures 7 ft from tip to tip.
How is the shielded Cat6a cable installed, and what step is often missed?
Press each RJ45 plug until the snagless latch clicks; the common mistake is not fully seating the shielded connector so the foil shield stays continuous.
What maintenance does the aqua shielded Cat6a cable need over time?
Inspect the PVC jacket and snagless latches periodically; replace the cord if the aluminum-polyester foil becomes visible or a latch fails to lock.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Vertiv
Vertiv 4UTELECOMRKIT 19 in rack mount bracket accessory
- GXT4U Wall Mount Br…
- Mounting Bracket
$70.99
0.00082459BTC
In stock
