We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aqua shielded Cat6a patch cable 35 ft with snagless RJ45 connectors

STARTECH

STARTECH C6ASPAT35AQ Cat6a Shielded Patch Cable 35 ft Aqua

SKU CH-10TQ-WJYC3 MPN C6ASPAT35AQ

A 35 ft aqua Cat6a shielded patch cable with snagless RJ45 connectors for 10 Gigabit network connections free of EMI and RFI interference

  • TypeConsumer Electronics
  • Cat6A
  • Connector ARJ45
  • Connector BRJ45
  • Length35 ft.
  • ColorAqua
  • Delivers 10 Gigabit network connections free of EMI and RFI interference
  • 35 ft aqua cable with snagless RJ45 connectors for easy routing
  • Shielded with aluminum-polyester foil to block external noise
  • 26 AWG stranded copper conductors rated for 100 W PoE
  • CMG fire-rated jacket meets ANSI/TIA-568-D Category 6 requirements

35 ft Aqua Cat6a Cable

This 35-foot aqua Cat6a shielded patch cable delivers high-performance 10 Gigabit network connections using 26 AWG stranded 100% copper conductors. Aluminum-polyester foil shielding blocks EMI and RFI interference. Snagless RJ45 connectors protect the locking tabs during installation. The cable is rated for 100 W PoE applications.

Sustained 10 Gb throughput

Under continuous load the foil shield maintains signal integrity by rejecting external noise that degrades throughput on unshielded runs. Stranded copper construction resists fatigue from repeated bending in patch-panel or rack environments. CMG-rated PVC jacket meets general-purpose fire requirements for in-wall or floor routing.

ANSI/TIA-568-D Category 6 limit

The link is tested to comply with ANSI/TIA-568-D Category 6 requirements, which define the maximum channel length and insertion-loss budget for 10 Gigabit operation. Exceeding the specified distance or adding untested connectors will push the channel outside the standard's guaranteed performance envelope.

Highlights

  • Delivers 10 Gigabit network connections free of EMI and RFI interference
  • 35 ft aqua cable with snagless RJ45 connectors for easy routing
  • Shielded with aluminum-polyester foil to block external noise
  • 26 AWG stranded copper conductors rated for 100 W PoE
  • CMG fire-rated jacket meets ANSI/TIA-568-D Category 6 requirements

Specifications

BrandStarTech.com
ModelC6ASPAT35AQ
TypeConsumer Electronics
Cat6A
Connector ARJ45
Connector BRJ45
Length35 ft.
ColorAqua
ShieldedAluminum-polyester foil
FeaturesDeliver high-performance 10 Gigabit network connections, free of noise and EMI / RFI interference
Hardware
Cable Jacket Type: PVC - Polyvinyl Chloride
Cable Type: Shielded Snag-less
Fire Rating: CMG Rated (General Purpose)
Number of Conductors: 4 Pair STP
Performance
Cable Rating: CAT6a - 10 Gbit/s
Physical Characteristics
Conductor Type: Stranded Copper
Wire Gauge: 26 AWG
Shipping weight0.68 kg
Package size305 × 254 × 203 mm

Questions about this item

Does the foil shielding keep the 10 Gbps signal clean during long runs near power cables?

Yes, the aluminum-polyester foil shield blocks EMI and RFI so the Cat6a cable maintains 10 Gigabit performance without noise.

What devices need RJ45 ports to use this 35 ft aqua patch cord?

Any switch, router, server or NIC with standard RJ45 jacks will connect directly; no adapters or special modules are required.

Will the snagless boots and 26 AWG stranded copper work with older Cat5e or Cat6 ports?

The RJ45 plugs are fully backward compatible and the flexible stranded conductors seat reliably in legacy Cat5e and Cat6 jacks.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.