STARTECH
STARTECH C6ASPAT20BK Cat6a Shielded Ethernet Cable 20 ft Black
A 20 ft shielded Cat6a patch cable with snagless RJ45 connectors delivers 10 Gbps Ethernet and PoE up to 100 W
- TypeConsumer Electronics
- Cat6A
- Connector ARJ45
- Connector BRJ45
- Length20 ft.
- ColorBlack
- Supports 10 Gbps Ethernet for high-speed data transfer
- Shielded with aluminum-polyester foil to block EMI and RFI interference
- Snagless RJ45 connectors protect tabs from damage during installation
- 26 AWG stranded copper conductors ensure reliable signal integrity
- CMG fire-rated jacket approved for general-purpose in-wall runs
20 ft Cat6a Shielded Patch Cable
This 20 ft Cat6a shielded patch cable uses 26 AWG stranded copper conductors and aluminum-polyester foil shielding to deliver 10 Gbps Ethernet performance. Snagless RJ45 connectors with 50-micron gold contacts resist damage during repeated insertion. The CMG-rated PVC jacket suits general-purpose indoor runs. ETL verification confirms compliance with ANSI/TIA-568-D Category 6 requirements.
Suited for high-speed PoE links up to 100W
The cable supports 100W Power over Ethernet alongside 500 MHz bandwidth, making it appropriate for access points, cameras and switches that need both data and power on a single run. Builders who require plenum-rated or outdoor-rated jackets should select a different cable type. Installations needing longer continuous lengths will need additional couplers or a bulk spool.
Consistent throughput under sustained 10 Gbps loads
Shielded construction suppresses EMI and RFI interference that can degrade signal integrity during prolonged high-throughput transfers. Stranded 100% copper conductors maintain flexibility without increasing attenuation over the 20 ft distance. The snagless boot design protects the latch tab, reducing intermittent disconnects when cables are routed through tight cable-management channels.
Highlights
- Supports 10 Gbps Ethernet for high-speed data transfer
- Shielded with aluminum-polyester foil to block EMI and RFI interference
- Snagless RJ45 connectors protect tabs from damage during installation
- 26 AWG stranded copper conductors ensure reliable signal integrity
- CMG fire-rated jacket approved for general-purpose in-wall runs
Specifications
| Brand | StarTech.com |
|---|---|
| Model | C6ASPAT20BK |
| Type | Consumer Electronics |
| Cat | 6A |
| Connector A | RJ45 |
| Connector B | RJ45 |
| Length | 20 ft. |
| Color | Black |
| Shielded | Aluminum-polyester foil |
| Features | Deliver high-performance 10 Gigabit network connections, free of noise and EMI / RFI interference Hardware Cable Jacket Type: PVC - Polyvinyl Chloride Cable Type: Shielded Snag-less Fire Rating: CMG Rated (General Purpose) Number of Conductors: 4 Pair STP Performance Cable Rating: CAT6a - 10 Gbit/s Physical Characteristics Conductor Type: Stranded Copper Wire Gauge: 26 AWG |
| Shipping weight | 0.50 kg |
| Package size | 220 × 200 × 10 mm |
Questions about this item
Do I need a router or switch with 10 Gigabit ports to use this 20 ft Cat6a cable?
Yes, both ends of the link must support 10 Gbps to reach the rated speed.
Will this shielded Cat6a patch cord work with my existing Cat6 wall jacks?
The RJ45 connectors are backward compatible with Category 6 hardware.
How can I verify the cable is delivering a 10 Gigabit link after I plug it in?
Check the link-speed indicator on the switch or NIC; it should show 10 Gbps.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Mancini Leather Goods South Beach RFID Quadruple Fold Wallet Green
- 0
- Wallets & Billfolds
Mancini Leather Goods South Beach RFID Trifold Wallet Blue
- 0
- Wallets & Billfolds
Monoprice Inc. 9852 network ethernet cable 7 ft purple
- Network Ethernet Ca…
- 2.1336



