We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aqua duplex fiber patch cable with LC and SC connectors 16.4 ft 50 125 micron

STARTECH

STARTECH A50FBLCSC5 fibre optic cable 50/125 µm 16.4 ft LC SC aqua

SKU CH-EHVX-J4FYG MPN A50FBLCSC5

A 16.4 ft aqua duplex multimode patch cord with 50/125 µm core and LC to SC connectors

  • TypeCable Connectors
  • ColorAqua
  • Length16.40 ft
  • Connector Number1
  • Connector DetailConnector on First End:2 x LC Male Connector on Second End:2
  • FeaturesCable Type: Fiber OpticCore/Cladding Diameter: 50/125 µmCabl
  • Multimode 50/125 µm core supports high‑bandwidth links
  • 4 ft length fits typical rack‑to‑rack runs
  • Aqua jacket identifies OM3/OM4 fibre at a glance
  • Dual LC to dual SC ends connect mixed‑vendor gear
  • Lifetime limited warranty backs long‑term reliability

Multimode fibre patch cable 50/125 µm

This duplex multimode patch cable uses a 50/125 µm core and cladding to carry data between LC and SC equipment. The aqua jacket identifies the OM3/OM4 multimode rating at a glance. It is built for LAN backbones, data-centre cross-connects and campus links that require the LC-SC connector combination.

Sustained signal integrity over 16.4 ft

The 16.4 ft length keeps insertion loss low enough for continuous high-bandwidth traffic such as storage replication or video streaming. Multimode glass maintains modal bandwidth across the full run without the signal degradation that can appear in longer copper runs. Each end is factory polished and tested to meet the stated lifetime warranty.

Practical limits of the LC-SC multimode interface

The LC-SC pairing restricts the cable to ports that match those exact connectors; it cannot plug directly into ST, MTP or single-mode transceivers. Multimode 50/125 µm fibre supports the reach and bandwidth defined by the OM3/OM4 standards, but it will not achieve the distance or wavelength performance of single-mode cabling. Buyers who need single-mode reach or a different connector mix must choose a different cable assembly.

Highlights

  • Multimode 50/125 µm core supports high‑bandwidth links
  • 4 ft length fits typical rack‑to‑rack runs
  • Aqua jacket identifies OM3/OM4 fibre at a glance
  • Dual LC to dual SC ends connect mixed‑vendor gear
  • Lifetime limited warranty backs long‑term reliability

Specifications

BrandStarTech.com
TypeCable Connectors
ColorAqua
Length16.40 ft
Connector Number1
Connector DetailConnector on First End:2 x LC Male
Connector on Second End:2 x SC Male
FeaturesCable Type: Fiber OpticCore/Cladding Diameter: 50/125 µmCable Length: 16.4 ftConnector on First End: 2 x LC MaleConnector on Second End: 2 x SC MaleColor: AquaLimited Warranty: Lifetime
Shipping weight0.07 kg
Package size220 × 203 × 180 mm

Questions about this item

Does the 16.4 ft aqua multimode cable generate any heat or noise during continuous use?

No, the passive fibre assembly carries light instead of electricity so it produces no heat and no audible noise.

Which ports must my equipment provide for the 2 x LC and 2 x SC connectors to plug in directly?

You need two LC female ports on one device and two SC female ports on the other; the cable ends are fixed male connectors.

Can the 50/125 µm core and cladding pair with legacy multimode gear that uses the same diameter?

Yes, any legacy multimode interface built for 50/125 µm fibre will accept this cable without adapters.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.