We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 1.8m C14 to C13 power cord 16AWG 13A 250V

STARTECH

STARTECH 87146600 1.8m C14 to C13 16AWG 13A 250V computer power cord

SKU CH-KKCV-7Q2M9

A 1.8m C14 to C13 extension cord rated 13A at 250V using 16AWG copper conductors and UL-listed components

  • 8 m length reaches distant PDU outlets
  • C14 to C13 connectors fit standard server equipment
  • 16 AWG copper conductors carry 13 A at 250 V
  • UL 62 and UL 817 listed components verify safety
  • REACH and RoHS compliant materials reduce environmental impact

Product identity

The StarTech 87146600 is a 1.8 metre IEC 60320 C14 to C13 power cord rated at 13 A and 250 V. It is built with 16 AWG conductors using 100 % copper wiring for reliable continuity. The cord uses UL listed components and meets UL62 and UL817 compliance standards. IT professionals select it for connecting equipment to PDUs or UPS units in rack environments.

Build integration

The C14 plug inserts into a PDU or UPS outlet while the C13 connector mates with a server, switch or workstation power supply. Its 1.8 m length provides reach inside a standard rack without excess slack that obstructs airflow. The cord requires no additional adapters and frees the installer from sourcing separate jumper cables. It is not suited for direct wall-outlet connection or for devices that demand a higher current rating than 13 A.

Capacity and headroom

The 16 AWG copper conductors deliver full 13 A capacity at 250 V for typical rack-mounted loads. The cord is tested in temperature chambers to verify performance under sustained operation. It satisfies REACH and RoHS directives for reduced environmental impact. It does not support loads exceeding 13 A and is not intended for high-amperage distribution circuits beyond its rated specification.

Highlights

  • 8 m length reaches distant PDU outlets
  • C14 to C13 connectors fit standard server equipment
  • 16 AWG copper conductors carry 13 A at 250 V
  • UL 62 and UL 817 listed components verify safety
  • REACH and RoHS compliant materials reduce environmental impact

Specifications

No published specifications for this item yet.

Questions about this item

What is the maximum continuous current this 16 AWG cord can carry without overheating?

The cord is rated for 13 A continuous current, matching the 16 AWG conductor capacity and the C13 connector limit.

How warm does the cable jacket get when the full 13 A load runs for hours?

The cable has been temperature-chamber tested to confirm reliable performance at its rated 13 A / 250 V load during sustained operation.

Which inlet must my PDU or UPS provide for the C14 plug to connect?

The C14 plug mates with a standard IEC 60320 C13 inlet, the common socket found on most rack PDUs and UPS units.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.