We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aqua duplex zipcord cable with LC and SC connectors

STARTECH

STARTECH 3m LC/UPC to SC/UPC OM3 Multimode Fibre Optic Cable 50/125 100G LSZH

SKU CH-9GQ2-YTDT7

Connects LC and SC equipment with OM3 multimode fibre supporting 10, 40 and 100 Gbps full-duplex links over 50/125 µm core

  • OM3 multimode supports 1/10/40/100 Gbps full-duplex links
  • LC/UPC to SC/UPC connectors with ceramic ferrules ensure low-loss connections
  • LSZH jacket emits minimal smoke and no halogen in fire
  • Aramid-fibre strength member protects fibres during pulls and bends
  • 3-metre zipcord length suits rack-to-rack and patch-panel runs

3m OM3 Multimode Fibre Cable LC/UPC to SC/UPC

This three-metre OM3 multimode fibre cable connects equipment with LC/UPC and SC/UPC ports. It supports full-duplex transmission at 10, 40 and 100 Gbps. The 50/125 micron core/cladding diameter suits short-range enterprise and data-centre links. A low-smoke zero-halogen jacket meets fire-safety requirements for indoor installations.

Suits short-reach 10 to 100 Gbps links

Network engineers patching switches, transceivers or patch panels that use different connector types will find this cable convenient. It is not for single-mode infrastructure, nor for links that require APC polishing or outdoor-rated sheathing. Buyers needing longer reach or single-mode performance should look at other cable types.

Verify both ends use UPC polish

Confirm that the LC and SC ports on your equipment are specified for UPC finish and OM3 multimode operation. Ensure the link budget matches the 50/125 micron fibre at the intended data rate. Check that the LSZH jacket complies with local building codes for the planned routing path.

Highlights

  • OM3 multimode supports 1/10/40/100 Gbps full-duplex links
  • LC/UPC to SC/UPC connectors with ceramic ferrules ensure low-loss connections
  • LSZH jacket emits minimal smoke and no halogen in fire
  • Aramid-fibre strength member protects fibres during pulls and bends
  • 3-metre zipcord length suits rack-to-rack and patch-panel runs

Specifications

No published specifications for this item yet.

Questions about this item

What type of transceiver ports must my switch or server have for this LC/UPC to SC/UPC cable to connect?

The cable uses LC/UPC and SC/UPC connectors, so you need matching LC and SC transceiver ports on your equipment.

Will this OM3 50/125 cable work with my existing OM1 or OM2 multimode patch panels?

OM3 50/125 fibre is backwards compatible with OM1 and OM2 links, but the overall channel will be limited to the lowest grade installed.

How can I confirm the cable is delivering 100 Gbps full duplex after installation?

Verify the link negotiates 100 Gbps full duplex on both ends and run a traffic test or optical power meter check to confirm performance.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.