Innovation First, Inc. 1UCMA-137 1U Cable Management Arm 19" 28.5"-33" computer accessory
- Product Type:Cable…
- Panel Width:19" Rac…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
STARTECH
Converts two full-size mSATA SSDs into a single 2.5″ SATA drive with RAID 0, 1, JBOD or BIG modes via a JMicron JMS562 controller
The StarTech 25SAT22MSAT installs two full-size mSATA SSDs inside a single 2.5-inch SATA drive bay. A JMicron JMS562 controller presents the pair to the host through one SATA data and power connector. Hardware RAID 0, RAID 1, JBOD and BIG spanning modes are selectable on the board.
Builders who want to combine two mSATA SSDs into one larger or redundant volume without using PCIe slots will find this adapter fits a standard 2.5-inch bay. It does not expose the drives as separate SATA devices, so systems that require independent drive recognition should consider a different approach.
The onboard chipset manages all RAID functions and the SATA III 6 Gbps link to the motherboard. RAID level is set via jumpers on the adapter, and the chosen mode determines whether capacity, speed or mirroring takes priority.
| Brand | StarTech.com |
|---|---|
| Model | 25SAT22MSAT |
| Color | Black |
| Conversion Tray | mSATA Drive to 2.5" Drive |
| Compatible Products | 2.5" |
| Specifications | Drive Installation: Fixed Drive Type: mSATA (Mini SATA) Interface : SATA Number of Drives: 2 Chipset ID: JMicron JMS562 Drive Connectors: 2 - mSATA (52 pin; Mini SATA) Receptacle Host Connectors: 1 - SATA Data & Power Combo (7+15 pin) Receptacle Maximum Data Transfer Rate : 6 Gbps Port Multiplier: Yes RAID: Yes Supported RAID Modes: - BIG (Spanning or Concatenation) - JBOD - (Just a Bunch of Disks) - RAID 0 (Striped Disks) - RAID 1 (Mirrored Disks) Type and Rate: SATA III (6 Gbps) |
| Features | Dual full size mSATA SSD bays Supports RAID0, RAID1, JBOD, BIG Open-frame steel mounting bracket 2.5in SATA form factor housing Compatible with SATA revision I/II/III (1.5/3.0/6.0 Gbps) drives and controllers |
| Shipping weight | 0.11 kg |
| Package size | 170 × 140 × 33 mm |
Any two full-size mSATA SSDs with a 52-pin Mini SATA edge connector will fit the dual receptacles on the adapter.
Yes, the adapter is compatible with SATA revision I, II and III controllers running at 1.5, 3.0 or 6.0 Gbps.
The array will appear as a single 2.5-inch SATA drive in your OS; use the OS disk utility or the controller BIOS to confirm the chosen RAID mode and capacity.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?