STARTECH
STARTECH 25ft White CAT8 Network Ethernet Cable
A 25 ft white CAT8 patch cord with shielded S/FTP construction, 26 AWG bare copper conductors, snagless RJ45 plugs, 2000 MHz bandwidth, 40 Gbps throughput and 100 W PoE++ support
- Supports 40 Gbps speeds with 2000 MHz bandwidth
- Delivers 100 W PoE++ power over 25 ft length
- S/FTP shielding blocks interference using aluminum Mylar tape
- Pure 26 AWG bare copper conductors ensure signal integrity
- Snagless RJ45 connectors with strain reliefs protect the cable ends
25 ft CAT8 Shielded Patch Cord
This 25 ft white CAT8 Ethernet cable uses 26 AWG pure bare copper conductors with S/FTP shielding and aluminium Mylar tape. Snagless RJ45 connectors and moulded strain reliefs protect the terminations. The LSZH jacket meets low-smoke, zero-halogen requirements. It is Fluke channel tested for certified performance.
Suited for 25 GbE and 40 GbE links with PoE++
The cord supports 25 Gbps and 40 Gbps data rates at 2000 MHz bandwidth and carries up to 100 W PoE++. Installers needing longer runs or outdoor-rated jackets should consider other options. Buyers who require unshielded UTP construction or a different cable colour will need an alternative product.
2000 MHz bandwidth at 25 Gbps and 40 Gbps
The 2000 MHz rating is the single specification that determines whether this cable matches the link speed and distance plan. Verify that the connected ports operate at 25 Gbps or 40 Gbps to use the full certified bandwidth.
Highlights
- Supports 40 Gbps speeds with 2000 MHz bandwidth
- Delivers 100 W PoE++ power over 25 ft length
- S/FTP shielding blocks interference using aluminum Mylar tape
- Pure 26 AWG bare copper conductors ensure signal integrity
- Snagless RJ45 connectors with strain reliefs protect the cable ends
Specifications
| Brand | StarTech |
|---|
Questions about this item
Does the 25 ft white CAT8 patch cord come with RJ45 connectors already fitted, or must I buy plugs separately?
The cable is supplied with shielded RJ45 connectors on both ends, including strain-relief boots, so no additional plugs are required.
Should I choose this 25 ft length or a different one for a 2000 MHz CAT8 run?
Select the length that matches the distance between your devices; the 25 ft option supports the full 2000 MHz bandwidth and 40 Gbit/s rating at this distance.
Will the 100 W PoE++ rating and 26 AWG bare copper conductors deliver full power to a distant access point?
Yes, the 26 AWG pure bare copper conductors are rated for 100 W PoE++, providing sufficient current capacity for high-power devices at the full 25 ft length.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
HP JY728A Micro USB 2.0 Console Adapter Cable for AP-203H AP-303H
- Adapter
- Black



