STARTECH
STARTECH 15ft 4.5m C14 to C13 Power Extension Cord 15A 250V 14AWG
A 4.5 metre C14-to-C13 extension cord rated 15 A at 250 V with 14 AWG conductors
- Extends reach by 15 ft (4.5 m) between C14 and C13 devices
- Handles 15 A at 250 V for high-power equipment
- 14 AWG conductors reduce voltage drop over long runs
- UL Listed certification confirms safety compliance
- New condition ensures full factory performance
Power reach for rack gear
The StarTech 15ft 4.5m C14 to C13 cord extends power from a PDU or UPS to servers, switches or workstations. Rated 15A at 250V with 14AWG conductors, it suits high-draw equipment in data-centre or lab racks. The 15-foot length bridges gaps between vertical PDU strips and mid-rack hardware. Buyers needing shorter runs or different plug types should choose another cable.
Cool running under load
The 14AWG copper handles the rated 15A without noticeable heating during continuous operation. No active cooling is involved, so the cord adds zero acoustic noise to the environment. Power loss over the 15ft span stays within normal limits for the gauge and voltage. The UL Listed mark confirms compliance with North American safety requirements.
Durable strain relief
Moulded C14 and C13 connectors resist accidental unplugging in vibration-prone racks. Thick PVC jacket protects conductors from abrasion when routed through cable managers or tray edges. The 14AWG build tolerates repeated re-seating during maintenance cycles. Installers should verify rack depth and PDU port spacing before deployment.
Highlights
- Extends reach by 15 ft (4.5 m) between C14 and C13 devices
- Handles 15 A at 250 V for high-power equipment
- 14 AWG conductors reduce voltage drop over long runs
- UL Listed certification confirms safety compliance
- New condition ensures full factory performance
Specifications
| Brand | StarTech |
|---|
Questions about this item
How do I connect the C14 and C13 ends to my equipment?
Plug the C14 connector into the PDU or UPS outlet and the C13 connector into the server or PSU inlet, ensuring both click fully into place; the 14AWG conductors handle 15A at 250V.
What wear should I watch for on this cord over time?
Inspect the jacket for cuts, the C13 and C14 pins for discoloration or looseness, and replace the cord if the 14AWG conductors show exposed copper or the connectors no longer latch securely.
At what load does the 14AWG gauge become the limiting factor during continuous operation?
The 14AWG conductors are rated for 15A at 250V; sustained loads above 15A will cause heating and voltage drop, so keep continuous draw at or below the 15A rating.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114708BTC
In stock
