We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White flat Ethernet cable ten feet long with clear RJ45 plugs

STARTECH

STARTECH 10ft White CAT8 Ethernet Cable 26AWG S/FTP 2000MHz 25G/40G 100W PoE++

SKU CH-B050-NNJ4R

A 10 ft white CAT8 patch cord delivers 25 Gbps or 40 Gbps at 2000 MHz with 100 W PoE++ over 26 AWG S/FTP copper

  • Supports 25G and 40G speeds with 2000MHz bandwidth
  • Delivers up to 100W PoE++ power over 10ft length
  • Pure 26AWG bare copper conductors ensure reliable signal integrity
  • S/FTP shielding with aluminum mylar tape reduces crosstalk and interference
  • Fluke channel tested and LSZH jacketed for safety compliance

10ft White CAT8 Ethernet Cable

This 10ft white CAT8 Ethernet cable delivers 25G and 40G speeds at 2000MHz bandwidth. It supports 100W PoE++ power delivery for demanding network devices. The S/FTP shielded construction uses 26AWG pure bare copper conductors with aluminium Mylar tape. Fluke channel testing confirms reliable performance for high-speed networking.

Suited for high-density data centres

Installers needing 25G or 40G backbone links with up to 100W power over Ethernet will benefit from the shielded design and strain-relief boots. Buyers who require longer runs beyond 10ft or a different jacket colour should consider alternative lengths. The LSZH jacket meets low-smoke requirements for regulated environments.

Snagless RJ45 connectors simplify termination

The snagless boots protect the RJ45 tabs during routing through cable managers or patch panels. Strain reliefs reduce stress on the solder points when cables are bent near the connector. Ensure the mating ports accept the shielded plug body; some ultra-slim switches may have clearance issues with the larger hood.

Highlights

  • Supports 25G and 40G speeds with 2000MHz bandwidth
  • Delivers up to 100W PoE++ power over 10ft length
  • Pure 26AWG bare copper conductors ensure reliable signal integrity
  • S/FTP shielding with aluminum mylar tape reduces crosstalk and interference
  • Fluke channel tested and LSZH jacketed for safety compliance

Specifications

BrandStarTech

Questions about this item

What type of RJ45 ports do my devices need to use this cable?

The cable uses standard snagless RJ45 connectors, so any device with a standard RJ45 Ethernet port will accept it.

Will this cable work with my existing Cat6 patch panel and older gigabit switch?

Yes, the cable is fully backward compatible and will negotiate the highest speed both ends support, up to 25 Gbps or 40 Gbps where the hardware allows.

How can I verify the cable is delivering its rated 2000 MHz performance after installation?

The cable is Fluke channel tested; you can confirm performance by running a certification test with a qualified cable analyser or by checking link speeds of 25 Gbps or 40 Gbps on connected equipment.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.