We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Starlink Mini DC Power Cable 16.4 ft Grey 20AWG 100W

SKU CH-DFFT-2ETXD

A 16.4 ft waterproof DC cable delivers 100 W to the Starlink Mini via 20 AWG coaxial wire and 5.5 × 2.1 mm male connectors

  • TypeCable Connectors
  • ColorBlack
  • Length3 ft.
  • Connector Number1
  • Terminal GenderMale to Male
  • Specifications20 amps, 20 volts_of_direct_current, DC to DC Cable, 4, 16.4
  • 4 ft length gives flexible placement for outdoor or indoor setups
  • Waterproof PVC housing protects the connection in rain or damp conditions
  • 100 W delivery through 20 AWG coaxial cable keeps Starlink Mini powered reliably
  • Male-to-male DC 5.5×2.1 mm plugs match the original charger for plug-and-play replacement
  • Grey finish and rugged build suit portable use on the move

Starlink Mini DC Power Cable 16.4 ft

The Starlink Mini DC Power Cable is a 16.4 foot replacement cord built exclusively for the Starlink Mini terminal. It delivers 100 W over a 20 AWG coaxial link with male-to-male DC 5.5 mm by 2.1 mm connectors. The grey PVC jacket is waterproof and dustproof, making the cable suitable for outdoor travel, camping or fixed outdoor installations where the original cable is too short.

Plug-and-play installation with Mini-only fit

The cable mates directly with the Starlink Mini’s factory DC charger, so installation is a simple plug-in on both ends. No tools, splicing or configuration are required. The only common issue is attempting to use the cord with any other Starlink model or third-party device; the connector and voltage spec are specific to the Mini and will not fit or power other equipment.

100 W headroom for the Mini terminal

At 100 W the cable comfortably supplies the Starlink Mini’s full operating draw with margin for peak demand. The 20 AWG conductors keep voltage drop low over the 16.4 ft run. The limit is the Mini itself — this cable cannot power larger Starlink dishes or any device that needs a different connector or higher wattage.

Highlights

  • 4 ft length gives flexible placement for outdoor or indoor setups
  • Waterproof PVC housing protects the connection in rain or damp conditions
  • 100 W delivery through 20 AWG coaxial cable keeps Starlink Mini powered reliably
  • Male-to-male DC 5.5×2.1 mm plugs match the original charger for plug-and-play replacement
  • Grey finish and rugged build suit portable use on the move

Specifications

BrandMonoprice
ModelSG3MPCDD-5M
TypeCable Connectors
ColorBlack
Length3 ft.
Connector Number1
Terminal GenderMale to Male
Specifications20 amps, 20 volts_of_direct_current, DC to DC Cable, 4, 16.4, feet, Grey, SG3MPCDD-5M
Disclaimer1 year

Questions about this item

How can I confirm the cable is delivering the full 100 W to my Starlink Mini after I connect it?

The dish will power on and maintain a steady connection without the low-power warnings that appear when voltage drops below the required level.

The box lists a single cable — are the 5.5 mm by 2.1 mm DC plugs already fitted or do I need to buy connectors separately?

Both male-to-male DC 5.5*2.1 mm plugs are pre-installed on the 20 AWG coaxial cable, so nothing else is required.

I see 6.5 ft and 16.4 ft versions — which length should I pick for a roof-mounted dish with the router indoors?

Choose the 16.4 ft cable when the run from the outdoor dish to the indoor power source exceeds 6.5 ft; otherwise the shorter version keeps slack to a minimum.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.